After the underfloor heating pipes have been laid, the anti-crack strips are often only placed on the first layer. Its function is to stretch the layer of cement that will cover the underfloor heating pipe to prevent cracking, so putting more layers is of no use.
Floor heating mesh, also known as floor heating mesh and special floor heating mesh, is made of Q235 low carbon steel wire of high quality welded together. It has the characteristics of flat mesh surface and firm welding. uniform joints and meshes. Its function is to improve the overall strength of the insulation board and facilitate the installation and fixing of the heating pipe. The specifications of commonly used underfloor heating mesh are: wire diameter 2mm, mesh 10cm × 10cm, length and width 1m × 2m.
What are the advantages of applyingation of hot immersion heating mesh?
When overlapping the anti-cracking mesh, the overlap on both sides should not be less than 200 ~ 300mm.
The functions of the anti-crack mesh for underfloor heating:
1. It may have a fixing effect on installed pipes. Lay the underfloor heating mesh on the surface of the insulation. Layer and tie it with nylon with a fixed pipe. It can make the construction speed faster, construction positioning accurate, and the overall effect of pipeline installation better.
2. It is useful to improve the local bearing capacity of the floor in places with large floor loads, such as processing workshops and garages, underfloor heating mesh used for underfloor heating can increase the resistance overall soil. the soil structure and avoid soil rupture and collapse?.
3. The underfloor heating mesh is also very effective in dissipating heat. Since steel bars have relatively strong thermal conductivity, the ground dissipates heat very evenly and quickly.
4. To prevent floor cracks, a floor heating mesh should be laid between the pipes and the concrete. The reason for the floor cracking was that the floor heating mesh was not used and the concrete on the floor was too thin.
What should you pay attention to before installing and laying an underfloor heating network?
1. When the steel bars are thicker and the welded mesh cannot be bent, you can weld 1-2 fewer steel bars to the ends of the welded mesh, then drill both ends into the beam and use bars straight. Use on-site bonding methods to compensate for reduced transverse steel bars, steel barsAdditional er and welded mesh connections at each node should be used.
2. Before installing the underfloor heating mesh, an installation plan for the underfloor heating mesh must be drawn up. When installing underfloor heating mesh, installation guidelines should be based on on-site and on-site practice. the efficiency of the personnel responsible for the equipment.
3. For the welded mesh that needs to be anchored at both ends in the beam, when the longitudinal steel bars of the floor heating mesh are thin, use the bending deformation function of the floor heating mesh to bend first. the middle part of the welded mesh upwards. Make sure both ends can be inserted into the beam one after the other, then lay the floor heating mesh flat.
4. Between the ends of the welded mesh, the overlap length of the bar lap jointof steel shall not be less than 1.3 times the anchorage length la and shall not be less than 200 mm in the overlap zone. , each welded mesh for floor heating There shall be no less than one transverse steel bar on each sheet of floor heating mesh, and the distance between one transverse steel bar outside the two underfloor heating mesh sheets should not be less than 50 mm.
5. When one of the two floor heating mesh sheets in the overlap area does not have transverse steel bars, the ribbed floorThe overlap length of the hot mesh should be 1.3 times the anchoring length la and must not be less than 300 mm. When the diameter d of the longitudinally stressed steel bars in the overlap area is ≥ 10 mm, the overlap length shall be increased by 5d.
How much does guardrail mesh cost? What sont guardrail mesh manufacturers?
1. galvanized wire which is automatically butt welded. It has the advantages of firm welding points, flat mesh surface, mechanized production and large daily output. It is particularly suitable for the construction of underfloor heating.
2. The wire diameter can be thickened or thinned according to the mesh size, and the price is relatively moderate.
3. Can be mass produced as required. The color surface is black or galvanized or sprayed with white baking paint or green paint.
4. Used in professional projects for the construction of underfloor heating and building partitions or external insulation.
5. It can easily fix the pipes to prevent them from being misaligned during the ash spreading process;
6. It effectively improves the bearing capacity of soil and tuyaux. are not easily crushed;
7. It can prevent floor cracks;
8. The floor heating mesh can effectively accelerate heat dissipation and increase heating efficiency.
The surface of the mesh is very smooth without additional treatment, the solder joints are firm, and all solder joints are smooth and without protrusions. The mesh after anti-rust treatment has good anti-rust and anti-corrosion effects. .
Guardrail mesh is a very common product. You can see the shadow of the guardrail fence in many places. At first, the places where it is most commonly used are In. Some public occasions, over time, more and more individuals will choose to use guardrails in their homes. There are many guardrail mesh manufacturers on the market. The editor below will present to you the price of guardrails on the market and thes guardrail manufacturers.
The price of guardrail mesh
The price of guardrail mesh in the market is 16 yuan to 44.7 yuan/ square meter. (The price is taken from the Internet, for reference only.)
Guardrail mesh manufacturer
1. Anping County Gule Wire Mesh Products Co., Ltd. .
Anping County Gule Wire Mesh Products Co., Ltd. is located in Anping, Hebei, the famous hometown of wire mesh. Anping has a beautiful environment and convenient transportation. Our company is a company specializing in the field of wire mesh. production and operation of mesh nets and guardrails. The company has a large-scale fully automatic plastic spraying and dipping production line, a fully automatic computer welding mesh unit, a combination press, a bender and other equipment. auxiliaries, and haslarge-scale production capacities. The company's main products include plastic coated mesh, construction mesh, steel mesh, floor heating mesh, brick belt mesh, steel trusses, coal mine support mesh, galvanized mesh, welded mesh, decorative mesh, highway guardrail mesh, railway guardrail net, community guardrail net, prison guardrail net.
2. Anping County Hanxin Wire Mesh Products Co., Ltd.
Anping County Hanxin Wire Mesh Products Co., Ltd. (formerly Anping County Haoxiang Electric WeldingMesh Factory) is located in Anping County, the hometown of wire mesh in China. It is a manufacturer integrating production and sales. It is 250 kilometers from Beijing Airport and 200 kilometers from Tianjin Port. The geographical location is very advantageous. Specialized in proproduction of welded wire mesh, dutch wire mesh, guardrail wire mesh, american wire mesh, gabion wire mesh, crimped wire mesh, perforated wire mesh, expanded steel wire mesh, wire mesh stainless steel, barbed wire and other wire mesh products as well as insulating nails and hanging sheets, glue, mesh fabric and other exterior wall insulation products. Its products have the characteristics of anti-corrosion, aging resistance, acid and alkali resistance, non-fading, smooth and bright surface, comfortable feel and beautiful appearance.
3. Anping County Xinrun Wire Mesh Products Co., Ltd.
Anping County steel, metal meshque, floor heating mesh, pedal mesh, breeding mesh, Shule panel mesh, three-dimensional three-dimensional mesh, coal mine mesh, seed bed mesh, welding mesh, butt welding A specialized enterprise in the production and processing of mesh, brick belt mesh, guardrail mesh and other products, it has a complete and scientific quality management system. The integrity, strength and product quality of Xinrun Mesh Factory in Anping County have been recognized by the industry.
What is the price of guardrail mesh on the market? Who are the manufacturers of guardrail mesh? What is the basic situation of these guardrail mesh manufacturers? The styles of guardrail trellis are very diverse. The most common are green and rolled railing mesh. This type of guardrail mesh has a wide range of usesions, and schools and communities all have the shade of this type of guardrail mesh.