As follows:
1. Keychain; the red wire is connected to the positive terminal of the battery, the black wire is connected to the negative terminal. , and the power output of the ignition switch is connected to the green wire. There are two extinguisher wires, either positive or negative, and the output and input parts are positive and negative for the ignition system.
2. The yellow and black wires from the igniter are connected to the high voltage box, the blue and white wires, the positive trigger electrode, and the green and white wires. Trigger the negative electrode, white and black wires, connect to the black and white wires of the ignition lock, black and red wires, connect to the generator low voltage output, green wire and wire of earth.
3. There are two extinguisher wires, either positive or negative, and the output and input parts are positive and negative for the ignition system. An outdoor threadnction is connected to the negative pole of the coil and the other is connected to the positive pole. No sequence required, ammo prevents coil shorts.
Agricultural tricycle motor wiring method:
1. From the positive terminal of the battery --- the thick wire of the starter ---- the negative sign of the ammeter- ---the positive sign of the ammeter-- -----Ignition switch .
2. Ignition switch 2 is the positive pole of all vehicle lines (various electrical switches), the positive pole of the regulator - the positive pole of the generator. The F pole of the generator is connected to the F pole of the regulator, and just make iron near the negative pole of the generator and the regulator.
3. Most of the ignition switch 3 is not connected, sometimes it is connected to the tape recorder.
4. The fine wire from the ignition switch starter 4.
5. The relay power supply is connected to the thick wire terminalof the starter, the relay starter is connected to the fine wire terminal of the starter, the ignition is connected to the ignition switch and ground. is connected to the iron.