What will happen if the ground wire of the car generator is used to ground the live wire of the car generator
The method of grounding the car alternator is:
1 Depending on the grounding form of. the magnetic field winding, it is divided into: internally grounded generators and externally grounded generators;
2 according to the overall structure, they are divided into: ordinary alternators, alternators integrated and pumped alternators. Types of automobile alternators are:
1. According to the overall structure, they can be divided into: ordinary alternators, integrated alternators and pumped alternators;
2. rectifier structure, it can be divided into: six-tube alternator, eight-tube alternator and nine-tube alternator
3. According to the grounding form of the magnetic field winding, it can be divided into. : internal grounding type AC generator, alExternal grounding type ternator.
One million subsidies for the purchase of cars
Electricity production is too high, the generator is short-circuited, the wire the thicker one connected to the generator is shorted. circuited, and the insurance used is too high Small.
Inspection method: Remove the thicker wire from the back of the generator, install the insurance, and use the newly removed wire to scrub the terminal. Normally there will be no sparks. if the sparks are large, the generator is short-circuited.
The automobile generator is the main source of power for the car. Its function is to power all electrical equipment (except the starter) when the engine is running normally (above idle speed) and to charge the battery. at the same time. Based on the three-phase fixed winding of an ordinary alternator, the number of winding turns est increased and the terminals are taken out, and a set of three-phase bridge rectifier is added. At low speed, the original winding and the additional winding are output in series, while at higher speed, only the original three-phase winding is output.