The steps for installing the F170 generator footrests are as follows:
1. Positioning Car foot buckles are usually installed on the corners of footrests.
2. Mark, make a mark on the approximate location. If you don't bring a pen, use a utility knife to make a cross.
3. To make a hole, first mark it on the black card with a pen or convex marker, then print it on the pad and use a knife to cut the center part along the mark. .
4. Buckle the two parts of the buckle at the top and bottom of the foot pad respectively.
5. Get in the car and press the clutch and brake several times to see if the car floor mat buckles are firmly fixed.