As one of the most important parts, the generator can be repaired by taking appropriate measures if it is not producing electricity.
If the generator is not producing electricity, you can also judge this by checking the two voltage regulator wires. Generally, one wire is the positive pole output and the other wire is the positive pole output. output of the excitation wire. We can check if the two regulator wires are connected correctly or use a multimeter to check if the regulator is working properly.
Precautions when using the alternator:
1. Frequently clean dirt and dust from the exterior of the generator and keep it clean and well ventilated.
2. Frequently check the tightness of the generator-related fasteners and tighten the screws in time.
3. The tension of the drive belt must be appropriate. If he's too far awayche, it will slip easily and result in insufficient energy production; if it is too tight, it will easily damage the belt and generator bearings.
4. When installing the battery, be careful not to install it incorrectly. Usually, install the positive wire first and not the ground wire, otherwise the diode will burn out easily.
5. When using an integrated circuit regulator, the ignition switch should be turned off immediately when the engine is not running.
6. It is never allowed to use the “scratching” method to test whether electricity should be produced.
7. When the generator fails to generate electricity, it must be eliminated in time, otherwise it will cause a more serious breakdown.
Method/steps
Step one: Add engine oil.
Whether it is a two-stroke generator or a four-stroke generator, engine oil doesit be added. Two-stroke generators add blended oil, which means the engine oil and gasoline are in the same tank. Pay attention to two points when choosing engine oil. The first is to choose a two- or four-stroke engine, and the second is to choose whether antifreeze is needed. When adding engine oil, be sure to top it off!
Step 2: Add gasoline.
Gasoline generally chooses gasoline above 90, which is universal and can be purchased by ordinary customers at gas stations. Please use high quality gasoline and add at least 30% of the fuel tank volume.
Step 3: If it is an electric start gasoline generator, you must first connect the positive and negative wires of the battery cable. Those with electric start are more convenient if you are worried that the machine won't do it. start bWell, especially in the cold winter, you can consider purchasing an electric start generator, which is more convenient to use! (This step can be skipped for manually started machines).
4
Step 4: If you want to turn on the generator, first turn off the power switch, open the damper switch and turn on the fuel switch. It must be turned on, otherwise the generator will not start.
5
Step 5: Start the machine. When starting by hand, first pull the traction rope until there is resistance, then use it to pull quickly. 2 to 3 times in a row. (Electric start gasoline generator, started directly by key).