The method is as follows:
After removing the tire from the rim, attach the rubber sheet raw special At the wound, use a baking machine to bake the wound for about 10 minutesrightuntil the Raw rubber sheet and tire are completely attached. Tires repaired by this method are more durable and there is virtually no need to worry about further leakage from the wound.
The above is my answer.
There are four methods of tire maintenance:1. Perform a four-wheel alignment and tire rotation: Perform a four-wheel alignment and tire rotation every 10,000 miles.
2. Check Tire Pressure Frequently: Tire maintenance also includes checking air pressure regularly. Tires whose pressureof air exceeds the specified limit will significantly reduce the life of the tire, while tires with air. pressure lower than the specified limit will cause poor braking effect, and difficult or heavy steering will also shorten tire life.
3. Always pay attention to the marking lines on tires: Tire wear marks are located in the main drainage channels of the tires and are rubber bosses with a trapezoidal section. When the tire tread is worn down to the wear mark, the tire should be replaced. During the rainy season, in order to prevent vehicles from slipping on wet roads, the tire tread depth should be maintained at more than 3mm.
4. Check Tire Condition Frequently: Check tires frequently to quickly detect bulges, cracks, cuts, nails, ca agingvalve leakage and abnormal tire wear. Pay special attention to checking tire tread and edge wear. ?
I hope this can help you.
In terms of tire repair effect, hot repair is better than cold repair. Since hot repaired tires generally do not repeatedly leak air, cold repaired tires may deflate over an extended period of time. From a tire perspective, cold tire repair is better than hot tire repair. Since the cold patch will not damage the tire, it will only stick the grant film on the wound and the hot patch will destroy the tire structure.
The difference between fire repair and cold repair is that fire repair requires a baking machine to bake the crack until the film melts and can be glued to thecrack. Therefore, the advantage of fire repaired tires is that the repaired area is very durable and generally does not leak air repeatedly.
However, its flaws are also obvious. Fire repair requires formal equipment, and the technical requirements of the master are relatively high, so calculating the tire vulcanization time requires professional experience. If the high temperature curing time is too long, it will result in excess sulfur, brittle tread and blue surface. If the time is too short, it will cause sulfur deficiency and the repaired area will fall off easily. Tires on passenger cars are particularly thinner than those on large trucks. If the tire is not heated properly and the temperature is too high, the tire may be damaged.
In addition, the lifespan of tires after fire repair is short,because the fire repair of tires will affect the quality of tires.The decrease is mainly about half a year. Therefore, the tire repair method in case of fire should be used with caution. Currently, the most commonly used tire repair methods include mushroom tire patching and cold tire patching, with different applicable scopes. Mushroom nail repair is suitable for larger breaks, while cold repair is suitable for shallower, smaller breaks.