The reasons why Pacific Automotive Network Honda Lingpai suddenly stalled while driving: 1. The car's fuel tank was exhausted; 2. Circuit problems; 3. Ignition coil failure; 4. Damage to the fuel pump;
If the vehicle suddenly stalls while driving, do not panic at first. Try to stabilize the car as much as possible without turning the steering. Turn on the double turn signals and brake lightly depending on the situation. If it is a manual transmission car, you can press the clutch, shift the gear lever to the corresponding gear according to the vehicle speed, then release the clutch and use the vehicle speed to drive the engine, such as to start the engine. with a push cart, or you can restart the engine directly.
You can also turn on the double jump lights, stop the vehicle, then restart the engine. Then check the condition of the car according to the vehicle condition. If you can't check it, you can only call a tow truck for help.
If the car engine suddenly stalls, you should follow the following steps to solve the problem:
1. After you stop and park the car.
2. Check the engine: is the battery working properly? Is the water tank normal? Is the motor belt loose or broken?
3. If there is a problem with the battery, the sound when turning on is slower and quieter than the normal start-up sound.
4. If the water tank is defective, the engine water temperature will be high and there may be no water in the water tank. Sometimes the water in the water tank will. vaporize and expand due to high temperature.
5. If there is a problem with the oil circuit, the enginewill have an obvious feeling of frustration.
6. If there is a belt problem, the generator belt is loose and the power supply will be insufficient. If the belt is broken or lost, you can only wait for help.
7. Remember not to start the car easily. Causes of a sudden fire in a car while driving There are three common causes of a sudden fire in a car while driving. The possible cause of sudden misfire circuit failure is that the power is turned off due to low voltage while driving, resulting in misfires. At this point you can mainly check the ignition and starter switches as well as the fuse box. A short circuit in a low voltage line causes a dead fire, in this case an intermittent dead fire.
Check the car's low voltage circuit. The car suddenly turns offwhile driving. Most faults are ignition coils, capacitors and electronic ignition modules. This means it can start at the beginning, then it will die after a while, then it can start again, but it will die again.
The car died suddenly while driving. The oil circuit has broken down. The fuel pump was damaged, the oil pipe was broken, the carburetor oil inlet was blocked, and the fuel tank was empty. But in this case the car can restart, but it will be difficult.
If there is a problem with the ignition system or the engine overheating and exploding system, they will all stall. Sudden stalling faults while driving are different for cars with automatic and manual transmissions.
The car suddenly stalled while driving: automatic transmission and manual transmission are different.
1. Models to trautomatic transmission: automatic transmission models will not stall easily, while manual transmission models will not stall due to driving difficulty. If the level is not high, there may be frequent misfires , but this does not exclude that cars with automatic transmission do not have misfires. The main reason is the use of substandard fuel (many gas stations sell impure fuel in order to make huge profits). .oil) causing carbon buildup in the engine and misfiring.
(Photo/Text/Photo: Pacific Automotive Network Q&A)
What is the reason why the gasoline generator can start but does not produce electricity? 'electricity
Breathtaking combustion gas compression. The principle of generating energy by generator is that the wires cut the chainsmagnetic mps to generate electrical energy if they are not used for a long time or if they burn out during use, the magnetic field inside the generator will be completely consumed. magnetic field, electricity cannot be generated. I The best method is to suddenly accelerate and decelerate the accelerator several times. Generally speaking, power will come out slowly.
Generator Maintenance
Choose the Right Engine Oil When choosing engine oil, you need to know the ambient temperature of the vehicle and then the use accordingly. the vehicle manual. Check the quality and viscosity of the oil when purchasing engine oil. Remember to pack it when changing the oil. Every time the vehicle travels a certain number of kilometers, you must replace the engine oil and the third filter. routine maintenance. Usually there will be some left after udo not change the oil. Don't forget to add the remaining oil. Pack it up and remove it for later use. Do not mix engine oils.
Sometimes it turns out that the car's engine oil level is insufficient and it is necessary to add engine oil. At this point, be careful not to add different brands or types of engine oil to avoid oil leaking. deteriorate. Pay attention to the degree of wear of the bearings. If lubrication is found, if it is not sufficient, you can drop a few drops of engine oil from the mouth of the oil cup. Be careful not to enter the rectifier, otherwise it will affect the power transmission effect.
Will it break down if the car keeps stalling and bursts into flames several times? What bad effects will this have on the car?
If you can be sure that the alternator is good and not bad. But the reasonwhy there is no power is because it hasn't been used for a long time, or it was dragged to death while in use. The principle of generator power generation is that wires cut magnetic fields to generate electrical energy. If it is not used for a long time or burns out during use, the magnetic field inside the generator is completely consumed. Without a magnetic field, it is not possible to produce electricity. My method is to suddenly accelerate and decelerate the throttle several times. Generally speaking, power will come out slowly.
The main fire hazards are:
1. Used Oil: Without relighting, oil will be used for 68 seconds of idling (more when the car is running). cold);
p>
2. Cause wear and damage to gears;
3. Cause damage and excessive wear to the belts;
4. Cause tire wear; in this regard, industry experts point out that to prevent the car from stalling when starting, the main thing is not to disengage too quickly. Make sure you give enough oil, release the clutch a little. , then continue to release the clutch after feeling that the car has gained enough power. The same applies when starting on a half-slope. You must feel that the power of the car can overcome the force of the car's descent before releasing the handbrake, so that the car does not drive away. Once you master it, you can no longer use the handbrake. When you release the brake pedal and step on the accelerator, the car will slip a little, but everything will be fine soon after starting. The combination of oil separation is an important point for practicing a manual transmission car in a driving school. If you are a novice, you need moreof practice in this area.