SIST EN 60749-30:2005/A1:2011

Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing

SIST EN 60749-30:2005/A1:2011

Name:SIST EN 60749-30:2005/A1:2011   Standard name:Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing
Standard number:SIST EN 60749-30:2005/A1:2011   language:English language
Release Date:13-Sep-2011   technical committee:I11 - Imaginarni 11
Drafting committee:   ICS number:31.080.01 - Semiconductor devices in general
SLOVENSKI STANDARD
SIST EN 60749-30:2005/A1:2011
01-oktober-2011
3ROSUHYRGQLãNLHOHPHQWL0HKDQVNHLQNOLPDWVNHSUHVNXVQHPHWRGHGHO
3UHGNRQGLFLRQLUDQMHQHKHUPHWLþQLKHOHPHQWRY]DSRYUãLQVNRQDPHVWLWHYSUHG
SUHVNXãDQMHP]DQHVOMLYRVWL
Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning
of non-hermetic surface mount devices prior to reliability testing
Halbleiterbauelemente - Mechanische und klimatische Prüfverfahren - Teil 30:
Behandlung nicht hermetisch verkappter oberflächenmontierbarer Bauelemente vor
Zuverlässigkeitsprüfungen
Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques -- Partie
30: Préconditionnement des composants pour montage en surface non hermétiques
avant les essais de fiabilité
Ta slovenski standard je istoveten z: EN 60749-30:2005/A1:2011
ICS:
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
SIST EN 60749-30:2005/A1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60749-30:2005/A1:2011

---------------------- Page: 2 ----------------------

SIST EN 60749-30:2005/A1:2011

EUROPEAN STANDARD
EN 60749-30/A1

NORME EUROPÉENNE
July 2011
EUROPÄISCHE NORM

ICS 31.080.01


English version


Semiconductor devices -
Mechanical and climatic test methods -
Part 30: Preconditioning of non-hermetic surface mount devices prior to
reliability testing
(IEC 60749-30:2005/A1:2011)


Dispositifs à semiconducteurs -  Halbleiterbauelemente -
Méthodes d'essais mécaniques et Mechanische und klimatische
climatiques - Prüfverfahren -
Partie 30: Préconditionnement des Teil 30: Behandlung nicht hermetisch
composants pour montage en surface non verkappter oberflächenmontierbarer
hermétiques avant les essais de fiabilité Bauelemente vor
(CEI 60749-30:2005/A1:2011) Zuverlässigkeitsprüfungen
(IEC 60749-30:2005/A1:2011)




This amendment A1 modifies the European Standard EN 60749-30:2005; it was approved by CENELEC on
2011-06-29. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60749-30:2005/A1:2011 E

---------------------- Page: 3 ----------------------

SIST EN 60749-30:2005/A1:2011
EN 60749-30:2005/A1:2011 - 2 -
Foreword
The text of document 47/2019/CDV, future amendment 1 to IEC 60749-30:2005, prepared by IEC TC 47,
Semiconductor devices, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as amendment A1 to EN 60749-30:2005 on 2011-06-29.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
(dop) 2012-03-29
an identical national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2014-06-29
with the amendment have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of amendment 1:2011 to the International Standard IEC 60749-30:2005 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60749-30:2005/A1:2011
- 3 - EN 60749-30:2005/A1:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The f
...

  • Relates Information
  • IEC 60300-3-7:1999

    IEC 60300-3-7:1999 - Dependability management - Part 3-7: Application guide - Reliability stress screening of electronic hardware Released:5/31/1999 Isbn:2831847974
    09-20
  • HD 571 S1:1990

    HD 571 S1:1998
    09-20
  • ISO 8130-4:1992

    ISO 8130-4:1992 - Coating powders
    09-20
  • HD 478.2.7 S1:1990

    HD 478.2.7 S1:2003
    09-19
  • ISO 8473:1988/Cor 1:1992

    ISO 8473:1988/Cor 1:1992 - Information processing systems — Data communications — Protocol for providing the connectionless-mode network service — Technical Corrigendum 1 Released:12/10/1992
    09-19
  • EN ISO 9013:2017/prA1

    EN ISO 9013:2017/oprA1:2024
    09-19
  • IEC 60118-6:1999

    IEC 60118-6:1999 - Hearing aids - Part 6: Characteristics of electrical input circuits for hearing aids Released:6/9/1999 Isbn:2831848075
    09-19
  • HD 280.3 S1:1990

    HD 280.3 S1:1999
    09-19
  • ISO 9832:1992

    ISO 9832:1992 - Animal and vegetable fats and oils -- Determination of residual technical hexane content
    09-19
  • EN 60188:1988/A1:1990

    EN 60188:1999/A1:1999
    09-18