|
STANDARD
SIST EN 301 489-33 V1.1.1:2009
ETSI EN 301 489-33 V1.1.1 (2009-02)Harmonized European Standard (Telecommunications series) Electromagnetic compatibility andRadio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC)standard for radio equipment and services;Part 33: Specific conditions for Ultra Wide Band (UWB)communications devices
SIST EN 301 489-33 V1.1.1:2009
ETSI ETSI EN 301 489-33 V1.1.1 (2009-02) 2
Reference DEN/ERM-EMC-230-33 Keywords EMC, radio, UWB ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2009. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE™ is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 489-33 V1.1.1:2009
ETSI ETSI EN 301 489-33 V1.1.1 (2009-02) 3
Contents Intellectual Property Rights.4 Foreword.4 Introduction.4 1 Scope.5 2 References.6 2.1 Normative references.6 2.2 Informative references.6 3 Definitions and abbreviations.7 3.1 Definitions.7 3.2 Abbreviations.7 4 Test conditions.7 4.1 General.7 4.2 Arrangements for test signals.8 4.2.1 Arrangements for test signals at the input of transmitters.8 4.2.2 Arrangements for test signals at the output of transmitters.8 4.2.3 Arrangements for test signals at the input of receivers.8 4.2.4 Arrangements for test signals at the output of receivers.8 4.2.5 Arrangements for testing transmitter and receiver together (as a system).8 4.3 Exclusion bands.9 4.4 Narrow band responses on receivers or receivers which are part of transceivers.9 4.5 Normal test modulation.9 5 Performance assessment.9 5.1 General.9 5.2 Arrangements for the assessment of host dependant equipment and plug-in cards.9 5.2.1 Alternative A: composite equipment.10 5.2.2 Alternative B: use of a test jig or host.10 5.3 Assessment procedures.10 5.4 Ancillary equipment.10 5.5 Equipment classification.10 6 Performance criteria.11 6.1 General performance criteria.11 6.2 Performance table.11 6.3 Performance criteria for Continuous phenomena applied to Transmitters (CT).11 6.4 Performance criteria for Transient phenomena applied to Transmitters (TT).12 6.5 Performance criteria for Continuous phenomena applied to Receivers (CR).12 6.6 Performance criteria for Transient phenomena applied to Receivers (TR).12 7 Applicability overview.12 7.1 Emission.12 7.1.1 General.12 7.1.2 Special conditions.12 7.2 Immunity.12 7.2.1 General.12 7.2.2 Special conditions.13 Annex A (informative): The EN title in the official languages.14 Annex B (informative): Bibliography.15 History.16
SIST EN 301 489-33 V1.1.1:2009
ETSI ETSI EN 301 489-33 V1.1.1 (2009-02) 4
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [i.2] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC [i.1] of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive"). The present document is part 33 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
National transposition dates Date of adoption of this EN: 2 February 2009 Date of latest announcement of this EN (doa): 31 May 2009 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 November 2009 Date of withdrawal of any conflicting National Standard (dow): 30 November 2010
Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular structure is shown in EG 201 399 [i.4]. SIST EN 301 489-33 V1.1.1:2009
ETSI ETSI EN 301 489-33 V1.1.1 (2009-02) 5
1 Scope The present document, together with EN 301 489-1 [1] covers EMC requirements of transceivers, transmitters and receivers utilizing Ultra Wide Band (UWB) technologies and used for short range communication purposes. The present document applies to impulse, modified impulse and RF carrier based UWB communication technologies. The present document applies to fixed (indoor only), mobile or portable applications, e.g.: • stand-alone radio equipment with or without its own control provisions; • plug-in radio devices intended for use with, or within, a variety of host systems, e.g. personal computers, hand-held terminals, etc.; • plug-in radio devices intended for use within combined equipment, e.g. cable modems, set-top boxes, access points, etc.; • combined equipment or a combination of a plug-in radio device and a specific type of host equipment; • equipment for use in road and rail vehicles. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and EN 301 489-1 [1], the provisions of the present document take precedence. The environmental classification and the emission and immunity requirements used in the present document are as stated in EN 301 489-1 [1], except for any special conditions included in the present document. The present document does not cover UWB transmitter equipment to be installed at a fixed outdoor location or for use in flying models, aircraft and other forms of aviation as per the ECC/DEC/(06)04 [i.5]. The present document applies to UWB equipment with an output connection used with a dedicated antenna or UWB equipment with an integral antenna. These radio equipment types are capable of operating in all or part of the frequency bands given in table 1. Table 1: Radiocommunications frequency bands
Radiocommunications frequency bands Transmit 3,4 GHz to 4,8 GHz Receive 3,4 GHz to 4,8 GHz Transmit 6,0 GHz to 8,5 GHz Receive 6,0 GHz to 8,5 GHz
The present document is intended to cover the provisions of Directive 1999/5/EC [i.1] (R&TTE Directive),
article 3.1(b). In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive may apply to equipment within the scope of the present document. NOTE: A list of such ENs is included on the web site http://www.newapproach.org. SIST EN 301 489-33 V1.1.1:2009
ETSI ETSI EN 301 489-33 V1.1.1 (2009-02) 6
2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • Non-specific reference may be made only to a complete document or a part thereof and only in the following cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the referring document;
- for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. [1] ETSI EN 301 489-1 (V1.8.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements". 2.2 Informative references The following referenced documents are not essential to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. [i.1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R&TTE Directive). [i.2] Directive 98/34/EC of the
...