|
SIST EN 60603-7:2010
01-januar-2010
1DGRPHãþD
SIST EN 60603-7:2002
Konektorji za elektronsko opremo - 7. del: Podrobna specifikacija za 8-redne,
nezaslonjene, proste in fiksne konektorje (IEC 60603-7:2008)
Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded,
free and fixed connectors (IEC 60603-7:2008)
Steckverbinder für elektronische Einrichtungen - Teil 7: Bauartspezifikation für
ungeschirmte freie und feste Steckverbinder, 8polig (IEC 60603-7:2008)
Connecteurs pour équipements électroniques - Partie 7: Spécification particulière pour
les fiches et les embases non écrantées à 8 voies (CEI 60603-7:2008)
Ta slovenski standard je istoveten z: EN 60603-7:2009
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN 60603-7:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60603-7:2010
---------------------- Page: 2 ----------------------
SIST EN 60603-7:2010
EUROPEAN STANDARD
EN 60603-7
NORME EUROPÉENNE
November 2009
EUROPÄISCHE NORM
ICS 31.220.10 Supersedes EN 60603-7:1997
English version
Connectors for electronic equipment -
Part 7: Detail specification for 8-way, unshielded,
free and fixed connectors
(IEC 60603-7:2008)
Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Partie 7: Spécification particulière Teil 7: Bauartspezifikation
pour les fiches et les embases für ungeschirmte freie und feste
non écrantées à 8 voies Steckverbinder, 8polig
(CEI 60603-7:2008) (IEC 60603-7:2008)
This European Standard was approved by CENELEC on 2009-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60603-7:2009 E
---------------------- Page: 3 ----------------------
SIST EN 60603-7:2010
EN 60603-7:2009 – 2 –
Foreword
The text of document 48B/1883A/FDIS, future edition 3 of IEC 60603-7, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60603-7 on 2009-09-01.
This European Standard supersedes EN 60603-7:1997.
EN 60603-7:2009 includes the following significant technical changes with respect to EN 60603-7:1997:
– drawings and test schedules were updated based on the work done developing EN 60603-7-4;
– a corrected figure (Figure 10) illustrating a connector de-rating curve has been prepared and inserted
in the text;
– Annex D contains the dimensions that define the panel mounting features on the connector and panel
that were referenced as the Type A, variant 03 connector in EN 60603-7:1997.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60603-7:2008 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60603-7-2 NOTE Harmonized as EN 60603-7-2:2009 (not modified).
IEC 60603-7-3 NOTE Harmonized as EN 60603-7-3:2009 (not modified).
IEC 60603-7-4 NOTE Harmonized as EN 60603-7-4:2005 (no
...