SIST EN 61000-4-3:2006

Electromagnetic compatibility (EMC) -- Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

SIST EN 61000-4-3:2006

Name:SIST EN 61000-4-3:2006   Standard name:Electromagnetic compatibility (EMC) -- Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
Standard number:SIST EN 61000-4-3:2006   language:English language
Release Date:31-Aug-2006   technical committee:EMC - Electromagnetic compatibility
Drafting committee:   ICS number:33.100.20 - Immunity
SLOVENSKI SIST EN 61000-4-3:2006

STANDARD
september 2006
Elektromagnetna združljivost (EMC) – 4-3. del: Preskusne in merilne tehnike –
Preskušanje odpornosti proti sevanim radiofrekvenčnim elektromagnetnim
poljem (IEC 61000-4-3:2006)
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement
techniques - Radiated, radio-frequency, electromagnetic field immunity test (IEC
61000-4-3:2006)
ICS 33.100.20 Referenčna številka
SIST EN 61000-4-3:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61000-4-3

NORME EUROPÉENNE
May 2006
EUROPÄISCHE NORM

ICS 33.100.20 Supersedes EN 61000-4-3:2002 + A1:2002 + IS1:2004


English version


Electromagnetic compatibility (EMC)
Part 4-3: Testing and measurement techniques -
Radiated, radio-frequency, electromagnetic field immunity test
(IEC 61000-4-3:2006)


Compatibilité électromagnétique (CEM) Elektromagnetische Verträglichkeit (EMV)
Partie 4-3: Techniques d'essai Teil 4-3: Prüf- und Messverfahren -
et de mesure - Prüfung der Störfestigkeit
Essai d'immunité aux champs gegen hochfrequente
électromagnétiques rayonnés elektromagnetische Felder
aux fréquences radioélectriques (IEC 61000-4-3:2006)
(CEI 61000-4-3:2006)




This European Standard was approved by CENELEC on 2006-03-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61000-4-3:2006 E

---------------------- Page: 2 ----------------------

EN 61000-4-3:2006 - 2 -
Foreword
The text of document 77B/485/FDIS, future edition 3 of IEC 61000-4-3, prepared by SC 77B, High
frequency phenomena, of IEC TC 77, Electromagnetic compatibility, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 61000-4-3 on 2006-03-01.
This European Standard supersedes EN 61000-4-3:2002 + A1:2002 + IS1:2004.
The test frequency range may be extended up to 6 GHz to take acount of new services. The calibration of
the field as well as the checking of power amplifier linearity of the immunity chain are specified.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-03-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61000-4-3:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61000-4-3:2006
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year
1)
IEC 60050-161 International Electrotechnical Vocabulary - -
-
(IEV)
Chapter 161: Electromagnetic compatibility


1)
IEC 61000-4-6 Electromagnetic compatibility (EMC) -
-
-
Part 4-6: Testing and measurement
techniques - Immunity to conducted
disturbances, induced by radio-frequency
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27