|
SIST EN 61755-3-7:2009
01-junij-2009
2SWLþQLYPHVQLNL]DRSWLþQHNRQHNWRUMHGHO2SWLþQLYPHVQLNFLOLQGULþQD
SROLNDUERQDWQDWXONDVSUHPHURPDPPLQPPREGDMDMRþLPDWHULDOYODNHQ
L]WLWDQDHQRURGQRYODNQR,(&
Fibre optic connector optical interfaces - Part 3-7: Optical Interface, 2,5 mm and 1,25 mm
diameter cylindrical PC composite ferrule using Titanium as fibre surrounding material,
single mode fibre (IEC 61755-3-7:2009)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Optische Schnittstellen
von Lichtwellenleiter-Steckverbindern - Teil 3-7: Optische Schnittstelle - Zylindrische PC
-Composite-Ferrulen mit 2,5 mm und 1,25 mm Durchmesser für Einmodenfaser, mit
Titan als Material für die Faserfassung, Einmoden LWL (IEC 61755-3-7:2009)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Interfaces optiques
de connecteurs pour fibres optiques - Partie 3-7: Interfaces optiques, férules composites
cylindriques PC, de diamètre 2,5 mm et 1,25 mm, utilisant le titane comme matériau
entourant la fibre, fibres unimodales (CEI 61755-3-7:2009)
Ta slovenski standard je istoveten z: EN 61755-3-7:2009
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61755-3-7:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61755-3-7:2009
---------------------- Page: 2 ----------------------
SIST EN 61755-3-7:2009
EUROPEAN STANDARD
EN 61755-3-7
NORME EUROPÉENNE
April 2009
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic interconnecting devices and passive components -
Fibre optic connector optical interfaces -
Part 3-7: Optical interface,
2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule
using titanium as fibre surrounding material,
single mode fibre
(IEC 61755-3-7:2009)
Dispositifs d'interconnexion Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Interfaces optiques de connecteurs und passive Bauteile -
pour fibres optiques - Optische Schnittstellen
Partie 3-7: Interfaces optiques, von Lichtwellenleiter-Steckverbindern -
férules composites cylindriques PC, Teil 3-7: Optische Schnittstelle -
de diamètre 2,5 mm et 1,25 mm, Zylindrische PC-Composite-Ferrulen
utilisant le titane comme matériau mit 2,5 mm und 1,25 mm Durchmesser
entourant la fibre, fibres unimodales für Einmodenfaser, mit Titan als Material
(CEI 61755-3-7:2009) für die Faserfassung, Einmoden LWL
(IEC 61755-3-7:2009)
This European Standard was approved by CENELEC on 2009-03-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61755-3-7:2009 E
---------------------- Page: 3 ----------------------
SIST EN 61755-3-7:2009
EN 61755-3-7:2009 – 2 –
Foreword
The text of document 86B/2768/FDIS, future edition 1 of IEC 61755-3-7, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61755-3-7 on 2009-03-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-03-01
__________
Endorsement notice
The text of the International Standard IEC 61755-3-7:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61753-1 NOTE Harmonized as EN 61753-1:2007 (not modified).
IEC 61755-3 NOTE Harmonized in EN 61755-3 series (modified).
__________
---------------------- Page: 4 ----------------------
SIST EN 61755-3-7:2009
IEC 61755-3-7
Edition 1.0 2009-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Fibre optic
connector optical interfaces –
Part 3-7: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite
ferrule using titanium as fibre surrounding material, single mode fibre
Dispositifs d'interconnexion et composants passifs à fibres optiques – Interfaces
optiques de connecteurs pour fibres optiques –
Partie 3-7: Interfaces optiques, férules composites cylindriques PC, de diamètre
2,5 mm et 1,25 mm, utilisant le titane comme matériau entourant la fibre, fibres
unimodales
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
K
CODE PRIX
ICS 33.180.20 ISBN 2-8318-1023-2
Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 5 ----------------------
SIST EN 61755-3-7:2009
– 2 – 61755-3-7 © IEC:2009
CONTENTS
FOREWORD.3
1 Scope.5
2 Description .5
3 Interface parameters for PC ferrule independent from the ferrule material .6
Annex A (informative) .9
Bibliography.10
Figure 1 – Interface dimensions for PC ferrule .6
Figure 2 – Fibre core location .6
Figure 3 – Interface dimension of the end-face contact zone.7
Table 1 – Optical interface parameter values for 2,5 mm diameter PC ferrule .7
Table 2 – Optical interface parameter values for 1,25 mm diameter PC ferrule .8
---------------------- Page: 6 ----------------------
SIST EN 61755-3-7:2009
61755-3-7 © IEC:2009 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
FIBRE OPTIC CONNECTOR OPTICAL INTERFACES –
Part 3-7: Optical interface, 2,5 mm and 1,25 mm diameter
cylindrical PC composite ferrule using titanium as fibre
surrounding material, single mode fibre
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable effor
...