|
SIST EN 61462:2008
01-januar-2008
.RPSR]LWQLYRWOLL]RODWRUML7ODþQLLQEUH]WODþQLL]RODWRUML]DHOHNWULþQRRSUHPR]
QD]QDþHQRQDSHWRVWMRQDG9'HILQLFLMHSUHVNXVQHPHWRGHVSUHMHPQD
PHULODLQQDþUWRYDOVNDSULSRURþLOD,(&
Composite hollow insulators - Pressurized and unpressurized insulators for use in
electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods,
acceptance criteria and design recommendations (IEC 61462:2007)
Verbundhohlisolatoren - Druckbeanspruchte und drucklose Isolatoren für den Einsatz in
elektrischen Betriebsmitteln mit Bemessungsspannungen über 1 000 V - Begriffe,
Prüfverfahren, Annahmekriterien und Konstruktionsempfehlungen (IEC 61462:2007)
Isolateurs composites creux - Isolateurs avec ou sans pression interne pour utilisation
dans des appareillages électriques de tensions nominales supérieures a 1 000 V -
Définitions, méthodes d'essais, criteres d'acceptation et recommandations de conception
(IEC 61462:2007)
Ta slovenski standard je istoveten z: EN 61462:2007
ICS:
29.080.10 Izolatorji Insulators
SIST EN 61462:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 61462
NORME EUROPÉENNE
October 2007
EUROPÄISCHE NORM
ICS 29.080.10
English version
Composite hollow insulators -
Pressurized and unpressurized insulators for use in electrical equipment
with rated voltage greater than 1 000 V -
Definitions, test methods, acceptance criteria
and design recommendations
(IEC 61462:2007)
Isolateurs composites creux - Verbundhohlisolatoren -
Isolateurs avec ou sans pression interne Druckbeanspruchte und drucklose
pour utilisation dans des appareillages Isolatoren für den Einsatz in elektrischen
électriques de tensions nominales Betriebsmitteln mit
supérieures à 1 000 V - Bemessungsspannungen über 1 000 V -
Définitions, méthodes d'essais, Begriffe, Prüfverfahren, Annahmekriterien
critères d'acceptation und Konstruktionsempfehlungen
et recommandations de conception (IEC 61462:2007)
(CEI 61462:2007)
This European Standard was approved by CENELEC on 2007-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61462:2007 E
---------------------- Page: 2 ----------------------
EN 61462:2007 – 2 –
Foreword
The text of document 36C/167/FDIS, future edition 1 of IEC 61462, prepared by SC 36C, Insulators for
substations, of IEC TC 36, Insulators, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 61462 on 2007-10-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61462:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60507 NOTE Harmonized as EN 60507:1993 (not modified).
IEC 60694 NOTE Harmonized as EN 60694:1996 (not modified).
IEC 61006 NOTE Harmonized as EN 61006:1993 (not modified).
IEC 61166 NOTE Harmonized as EN 61166:1993 (not modified).
IEC 62271-100 NOTE Harmonized as EN 62271-100:2001 (not modified).
__________
-----
...