|
STANDARD
SIST EN ISO 3262-10:2001
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 3262-10May 2000ICS 87.060.10English versionExtenders for paints - Specifications and methods of test - Part10: Natural talc/chlorite in lamellar form (ISO 3262-10:2000)Matières de charge pour peintures - Spécifications etméthodes d'essai - Partie 10: Talc et chlorite naturels sousforme lamellaire (ISO 3262-10:2000)Füllstoffe für Beschichtungsstoffe - Anforderungen undPrüfverfahren - Teil 10: Verwachsungen von natürlichemplättchenförmigen Talk und Chlorit (ISO 3262-10:2000)This European Standard was approved by CEN on 10 March 2000.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2000 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 3262-10:2000 ESIST EN ISO 3262-10:2001
Page 2EN ISO 3262-10:2000CORRECTED
2001-04-11ForewordThe text of the International Standard ISO 3262-10:2000 has been prepared by TechnicalCommittee ISO/TC 35 "Paints and varnishes" in collaboration with Technical CommitteeCEN/TC 298 "Pigments and extenders", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publicationof an identical text or by endorsement, at the latest by November 2001, and conflictingnational standards shall be withdrawn at the latest by November 2001.According to the CEN/CENELEC Internal Regulations, the national standards organizations ofthe following countries are bound to implement this European Standard: Austria, Belgium,Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the UnitedKingdom.Endorsement noticeThe text of the International Standard ISO 3262-10:2000 was approved by CEN as aEuropean Standard without any modification.NOTE: Normative references to International Standards are listed in annex ZA (normative).SIST EN ISO 3262-10:2001
Page 3EN ISO 3262-10:2000Annex ZA (normative)Normative references to international publicationswith their relevant European publicationsThis European Standard incorporates by dated or undated reference, provisions from otherpublications. These normative references are cited at the appropriate places in the text and thepublications are listed hereafter. For dated references, subsequent amendments to or revisionsof any of these publications apply to this European Standard only when incorporated in it byamendment or revision. For undated references the latest edition of the publication referred toapplies (including amendments).NOTE Where an International Publication has been modified by common modifications,indicated by (mod.), the relevant EN/HD applies.PublicationYearTitleENYearISO 787-21981General methods of test for pigmentsand extenders - Part 2: Determinationof matter volatile at 105 degrees CEN ISO 787-21995ISO 787-91981General methods of test for pigmentsand extenders - Part 9: Determinationof pH value of aqueous suspensionEN ISO 787-91995ISO 787-181983General methods of test for pigmentsand extenders - Part 18: Determinationof residue on sie
...