|
STANDARDSIST EN 61300-2-48:20041DGRPHãþD
SIST EN 61300-2-48:2009
EUROPEAN STANDARD EN 61300-2-48 NORME EUROPÉENNE
EUROPÄISCHE NORM May 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-48:2009 E
ICS 33.180.20 Supersedes EN 61300-2-48:2003
English version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-48: Tests -
Temperature-humidity cycling (IEC 61300-2-48:2009)
Dispositifs d'interconnexion
et composants passifs à fibres optiques - Méthodes fondamentales d'essais
et de mesures -
Partie 2-48: Essais -
Cycles d'humidité et de température (CEI 61300-2-48:2009)
Lichtwellenleiter -
Verbindungselemente
und passive Bauteile -
Grundlegende Prüf- und Messverfahren - Teil 2-48: Prüfungen -
Temperatur-Feuchte-Zyklus (IEC 61300-2-48:2009)
This European Standard was approved by CENELEC on 2009-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 61300-2-48:2009
EN 61300-2-48:2009
– 2 – Foreword The text of document 86B/2807/FDIS, future edition 2 of IEC 61300-2-48, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-48 on 2009-04-01. This European Standard supersedes EN 61300-2-48:2003. The main changes are the addition of the Category O cycle procedure and the severity reconsideration. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2010-01-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2010-04-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61300-2-48:2009 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61300-2-21 NOTE
Harmonized as EN 61300-2-21:1997 (not modified). IEC 61300-2-46 NOTE
Harmonized as EN 61300-2-46:2006 (not modified). __________ SIST EN 61300-2-48:2009
– 3 – EN 61300-2-48:2009
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 61300-1 - 1) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 1: General and guidance EN 61300-1 2003 2)
IEC 61300-3-1 - 1) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 3-1: Examinations and measurements - Visual examination EN 61300-3-1 2005 2)
IEC 61300-3-4 - 1) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
Part 3-4: Examinations and measurements - Attenuation EN 61300-3-4 2001 2)
1) Undated reference.
2) Valid edition at date of issue.
SIST EN 61300-2-48:2009
SIST EN 61300-2-48:2009
IEC 61300-2-48Edition 2.0 2009-03INTERNATIONAL STANDARD
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures –
Part 2-48: Tests – Temperature-humidity cycling
INTERNATIONAL ELECTROTECHNICAL COMMISSION KICS 33.180.20 PRICE CODEISBN 2-8318-1033-6
Registered trademark of the International Electrotechnical Commission SIST EN 61300-2-48:2009
– 2 – 61300-2-48 © IEC:2009(E) CONTENTS FOREWORD.3 1 Scope.5 2 Normative references.5 3 General description.5 4 Apparatus.6 4.1 Chamber.6 4.2 Optical source and detector.6 5 Procedure.6 5.1 Preparation of specimens.6 5.2 Preconditioning.6 5.3 Initial examinations and measurements.6 5.4 Conditioning.6 5.4.1 Method A.6 5.4.2 Method B.7 5.5 Recovery.8 5.6 Final examinations and measurements.8 6 Severity.9 7 Details to be specified.9 Bibliography.10
Figure 1 – Temperature-humidity profile for Tmax = 65 °C, Tmin = −10 °C.7 Figure 2 – Temperature-humidity profile for Tmax = 85 °C.8
Table 1 – Test severities.9
SIST EN 61300-2-48:2009
61300-2-48 © IEC:2009(E) – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –
Part 2-48: Tests – Temperature-humidity cycling
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normat
...