|
širokopasovne sisteme za prenos podatkovElectromagnetic compatibility and Radio spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) standard for radio equipment - Part 17: Specific conditions for Broadband Data Transmission Systems33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.01Radijske komunikacije na splošnoRadiocommunications in generalICS:Ta slovenski standard je istoveten z:EN 301 489-17 Version 2.1.1SIST EN 301 489-17 V2.1.1:2009en01-julij-2009SIST EN 301 489-17 V2.1.1:2009SLOVENSKI
STANDARD
SIST EN 301 489-17 V2.1.1:2009
ETSI EN 301 489-17 V2.1.1 (2009-05)Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC)standard for radio equipment;Part 17: Specific conditions forBroadband Data Transmission Systems
SIST EN 301 489-17 V2.1.1:2009
ETSI ETSI EN 301 489-17 V2.1.1 (2009-05) 2
Reference REN/ERM-EMC-267-17 Keywords EMC, HIPERLAN, LAN, radio, regulation ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2009. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE™ is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 489-17 V2.1.1:2009
ETSI ETSI EN 301 489-17 V2.1.1 (2009-05) 3
Contents Intellectual Property Rights.5 Foreword.5 Introduction.5 1 Scope.6 2 References.6 2.1 Normative references.6 2.2 Informative references.7 3 Definitions and abbreviations.7 3.1 Definitions.7 3.2 Abbreviations.8 4 Test conditions.8 4.1 General.8 4.2 Arrangements for test signals.8 4.2.1 Arrangements for test signals at the input of transmitters.8 4.2.2 Arrangements for test signals at the output of transmitters.8 4.2.3 Arrangements for test signals at the input of receivers.9 4.2.4 Arrangements for test signals at the output of receivers.9 4.2.5 Arrangements for testing transmitter and receiver together (as a system).9 4.3 Exclusion bands.9 4.4 Narrow band responses on receivers or receivers which are part of transceivers.10 4.5 Normal test modulation.10 5 Performance assessment.10 5.1 General.10 5.2 Arrangements for the assessment of host dependant equipment and plug-in cards.10 5.2.1 Alternative A: composite equipment.10 5.2.2 Alternative B: use of a test jig or host.11 5.3 Assessment procedures.11 5.4 Ancillary equipment.11 5.5 Equipment classification.11 6 Performance criteria.11 6.1 General performance criteria.11 6.2 Performance table.12 6.3 Performance criteria for Continuous phenomena applied to Transmitters (CT).12 6.4 Performance criteria for Transient phenomena applied to Transmitters (TT).12 6.5 Performance criteria for Continuous phenomena applied to Receivers (CR).13 6.6 Performance criteria for Transient phenomena applied to Receivers (TR).13 7 Applicability overview.13 7.1 Emission.13 7.1.1 General.13 7.1.2 Special conditions.13 7.2 Immunity.13 7.2.1 General.13 7.2.2 Special conditions.13 Annex A (informative): Examples of radio equipment in the scope of the present document.14 A.1 Data transmission systems operating in the 2,4 GHz ISM band and using wide band modulation techniques.14 A.2 5 GHz high performance RLAN systems.14 A.3 Broadband data transmitting systems operating in the band 5 725 MHz to 5 875 MHz.14 SIST EN 301 489-17 V2.1.1:2009
ETSI ETSI EN 301 489-17 V2.1.1 (2009-05) 4
A.4 Broadband data transmitting/BWA Terminal Stations.14 Annex B (informative): The EN title in the official languages.15 Annex C (informative): Bibliography.16 History.17
SIST EN 301 489-17 V2.1.1:2009
ETSI ETSI EN 301 489-17 V2.1.1 (2009-05) 5
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [i.2] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Council Directive 1999/5/EC [i.1] of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive"). The present document is part 17 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
National transposition dates Date of adoption of this EN: 10 April 2009 Date of latest announcement of this EN (doa): 31 July 2009 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 January 2010 Date of withdrawal of any conflicting National Standard (dow): 31 January 2011
Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular structure is shown in EG 201 399 [i.9]. SIST EN 301 489-17 V2.1.1:2009
ETSI ETSI EN 301 489-17 V2.1.1 (2009-05) 6
1 Scope The present document, together with EN 301 489-1 [1], covers the assessment of Broadband Data Transmission System equipment, as detailed in annex A, in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment and performance criteria for wideband data communication systems. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and EN 301 489-1 [1], the provisions of the present document take precedence. The environmental classification and the emission and immunity requirements used in the present document are as stated in EN 301 489-1 [1], except for any special conditions included in the present document. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • Non-specific reference may be made only to a complete document or a part thereof and only in the following cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the referring document;
- for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. [1] ETSI EN 301 489-1 (V.1.8.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements". SIST EN 301 489-17 V2.1.1:2009
ETSI ETSI EN 301 489-17 V2.1.1 (2009-05) 7
2.2 Informative references The following referenced documents are not essential to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. [i.1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R&TTE Directive). [i.2] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. [i.3] ETSI EN 301 893: "Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". [i.4] ETSI EN 302 502: "Broadband Radio Access Networks (BRAN); 5,8 GHz fixed broadband data transmitting systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". [i.5] ETSI EN 302 544-2: "Broadband Data Transmission Systems operating in the 2 500 MHz to 2 690 MHz frequency band; Part 2: TDD User Equipment Stations; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". [i.6] ETSI EN 302 544-4: "Broadband Data Transmission Systems operating in the 2 500 MHz to 2 690 MHz frequency band; Part 4: FDD User Equipment Stations; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". [i.7] ETSI EN 302 623: "Broadband Wireless Access Systems (BWA) in the 3 400 MHz to 3 800 MHz frequency band; Mobile Terminal Stations; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". [i.8] ETSI EN 300 328: "Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive". [i.9] ETSI EG 201 399: "Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to the production of candidate Harmonized Standards for application under the R&TTE Directive". 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in EN 301 489-1 [1] and the following apply: Equipment Under Test (EUT): equipment under test and subject to the performance requirements of the present document fixed station: equipment intended for use in a fixed location and fitted with one or more antennas NOTE: The equipment may be fitted with
...