SIST EN 60947-1:2007/A1:2011

Low-voltage switchgear and controlgear - Part 1: General rules (IEC 60947-1:2007/A1:2010)

SIST EN 60947-1:2007/A1:2011

Name:SIST EN 60947-1:2007/A1:2011   Standard name:Low-voltage switchgear and controlgear - Part 1: General rules (IEC 60947-1:2007/A1:2010)
Standard number:SIST EN 60947-1:2007/A1:2011   language:English language
Release Date:25-Jan-2011   technical committee:SKA - Switchgear and control gear
Drafting committee:   ICS number:29.130.20 - Low voltage switchgear and controlgear
SLOVENSKI STANDARD
SIST EN 60947-1:2007/A1:2011
01-marec-2011
Nizkonapetostne stikalne naprave - 1. del: Splošna pravila (IEC 60947-
1:2007/A1:2010)
Low-voltage switchgear and controlgear - Part 1: General rules (IEC 60947-
1:2007/A1:2010)
Niederspannungsschaltgeräte - Teil 1: Allgemeine Festlegungen (IEC 60947-
1:2007/A1:2010)
Appareillage à basse tension - Partie 1: Règles générales (CEI 60947-1:2007/A1:2010)
Ta slovenski standard je istoveten z: EN 60947-1:2007/A1:2011
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
SIST EN 60947-1:2007/A1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60947-1:2007/A1:2011

---------------------- Page: 2 ----------------------

SIST EN 60947-1:2007/A1:2011

EUROPEAN STANDARD
EN 60947-1/A1

NORME EUROPÉENNE
January 2011
EUROPÄISCHE NORM

ICS 29.130.20


English version


Low-voltage switchgear and controlgear -
Part 1: General rules
(IEC 60947-1:2007/A1:2010)


Appareillage à basse tension -  Niederspannungsschaltgeräte -
Partie 1: Règles générales Teil 1: Allgemeine Festlegungen
(CEI 60947-1:2007/A1:2010) (IEC 60947-1:2007/A1:2010)




This amendment A1 modifies the European Standard EN 60947-1:2007; it was approved by CENELEC on
2011-01-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60947-1:2007/A1:2011 E

---------------------- Page: 3 ----------------------

SIST EN 60947-1:2007/A1:2011
EN 60947-1:2007/A1:2011 - 2 -
Foreword
The text of document 17B/1710/FDIS, future amendment 1 to IEC 60947-1:2007, prepared by SC 17B,
Low-voltage switchgear and controlgear, of IEC TC 17, Switchgear and controlgear, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60947-1:2007 on
2011-01-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2011-10-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2014-01-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of amendment 1:2010 to the International Standard IEC 60947-1:2007 was approved by
CENELEC as an amendment to the European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
[5] IEC 60947-7-1 NOTE  Harmonized as EN 60947-7-1.
[6] IEC 60998-2-2:2002 NOTE  Harmonized as EN 60998-2-2:2004 (modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 60947-1:2007/A1:2011
- 3 - EN 60947-1:2007/A1:2011
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Add the following normative references to the
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27