SIST EN 61326-2-5:2013

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1 (IEC 61326-2-5:2012)

SIST EN 61326-2-5:2013

Name:SIST EN 61326-2-5:2013   Standard name:Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1 (IEC 61326-2-5:2012)
Standard number:SIST EN 61326-2-5:2013   language:English language
Release Date:11-Feb-2013   technical committee:MOV - Measuring equipment for electromagnetic quantities
Drafting committee:   ICS number:19.080 - Electrical and electronic testing
SLOVENSKI STANDARD
SIST EN 61326-2-5:2013
01-marec-2013
1DGRPHãþD
SIST EN 61326-2-5:2007
(OHNWULþQDRSUHPD]DPHUMHQMHNRQWURORLQODERUDWRULMVNRXSRUDER=DKWHYH]D
HOHNWURPDJQHWQR]GUXåOMLYRVW (0& GHO3RVHEQH]DKWHYH3UHVNXVQH
NRQILJXUDFLMHREUDWRYDOQLSRJRMLLQPHULOD]DODVWQRVWLWHUHQVNLKQDSUDY]
YPHVQLNRPSR,(& ,(&
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-5: Particular requirements - Test configurations, operational conditions and
performance criteria for devices with field bus interfaces according to IEC 61784-1 (IEC
61326-2-5:2012)
Elektrische Mess-, Steuer-, Regel- und Laborgeräte - EMV-Anforderungen - Teil 2-5:
Besondere Anforderungen - Prüfanordnungen, Betriebsbedingungen und
Leistungsmerkmale für Geräte mit Feldbus-Schnittstellen gemäß IEC 61784-1 (IEC
61326-2-5:2012)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61326-2-5:2013
Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la
CEM - Partie 2-4: Exigences particulières - Configurations d'essai, conditions de
fonctionnement et critères d'aptitude à la fonction pour les appareils en exploitation avec
des interfaces utilisant des bus de terrain conformes à la CEI 61784-1 (CEI 61326-2-
5:2012)
Ta slovenski standard je istoveten z: EN 61326-2-5:2013
ICS:
19.080 (OHNWULþQRLQHOHNWURQVNR Electrical and electronic
SUHVNXãDQMH testing
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 61326-2-5:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 2 ----------------------

SIST EN 61326-2-5:2013

---------------------- Page: 3 ----------------------

SIST EN 61326-2-5:2013

EUROPEAN STANDARD
EN 61326-2-5

NORME EUROPÉENNE
January 2013
EUROPÄISCHE NORM

ICS 17.220; 25.040.40; 33.100 Supersedes EN 61326-2-5:2006


English version


Electrical equipment for measurement, control and laboratory use -
EMC requirements -
Part 2-5: Particular requirements -
Test configurations, operational conditions and performance criteria for
devices with field bus interfaces according to IEC 61784-1
(IEC 61326-2-5:2012)

Matériel électrique de mesure, de Elektrische Mess-, Steuer-, Regel- und
commande et de laboratoire - Laborgeräte – EMV-Anforderungen – Teil
Exigences relatives à la CEM - 2-5: Besondere Anforderungen –
Partie 2-4: Exigences particulières - Prüfanordnungen, Betriebsbedingungen
Configurations d'essai, conditions de und Leistungsmerkmale für Feldgeräte mit
fonctionnement et critères d'aptitude à la Feldbus-Schnittstellen gemäß IEC 61784-
fonction pour les appareils en exploitation 1
avec des interfaces utilisant des bus de (IEC 61326-2-5:2012)
terrain conformes à la CEI 61784-1
(CEI 61326-2-5:2012)

This European Standard was approved by CENELEC on 2012-11-06. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61326-2-5:2013 E

---------------------- Page: 4 ----------------------

SIST EN 61326-2-5:2013
EN 61326-2-5:2013 - 2 -
Foreword
The text of document 65A/643/FDIS, future edition 2 of IEC 61326-2-5, prepared by SC 65A, "System
aspects", of IEC TC 65, "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61326-2
...

  • Relates Information
  • IEC 60300-3-7:1999

    IEC 60300-3-7:1999 - Dependability management - Part 3-7: Application guide - Reliability stress screening of electronic hardware Released:5/31/1999 Isbn:2831847974
    09-20
  • HD 571 S1:1990

    HD 571 S1:1998
    09-20
  • ISO 8130-4:1992

    ISO 8130-4:1992 - Coating powders
    09-20
  • HD 478.2.7 S1:1990

    HD 478.2.7 S1:2003
    09-19
  • ISO 8473:1988/Cor 1:1992

    ISO 8473:1988/Cor 1:1992 - Information processing systems — Data communications — Protocol for providing the connectionless-mode network service — Technical Corrigendum 1 Released:12/10/1992
    09-19
  • EN ISO 9013:2017/prA1

    EN ISO 9013:2017/oprA1:2024
    09-19
  • IEC 60118-6:1999

    IEC 60118-6:1999 - Hearing aids - Part 6: Characteristics of electrical input circuits for hearing aids Released:6/9/1999 Isbn:2831848075
    09-19
  • HD 280.3 S1:1990

    HD 280.3 S1:1999
    09-19
  • ISO 9832:1992

    ISO 9832:1992 - Animal and vegetable fats and oils -- Determination of residual technical hexane content
    09-19
  • EN 60188:1988/A1:1990

    EN 60188:1999/A1:1999
    09-18