|
SIST EN 60966-2-1:2009
01-oktober-2009
1DGRPHãþD
SIST EN 60966-2-1:2004
5DGLMVNDIUHNYHQFDLQVHVWDYLNRDNVLDOQLKNDEORYGHO 3RGURþQDVSHFLILNDFLMD
]DVHVWDYHIOHNVLELOQLK ]YLMDYLK NRDNVLDOQLKNDEORY ,(&
Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for
flexible coaxial cable assemblies (IEC 60966-2-1:2008)
Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 2-1: Rahmenspezifikation für
flexible konfektionierte Koaxialkabel (IEC 60966-2-1:2008)
Ensembles de cordons coaxiaux et de cordons pour fréquences radioélectriques - Partie
2-1: Spécification intermédiaire pour cordons coaxiaux souples (CEI 60966-2-1:2008)
Ta slovenski standard je istoveten z: EN 60966-2-1:2009
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 60966-2-1:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60966-2-1:2009
---------------------- Page: 2 ----------------------
SIST EN 60966-2-1:2009
EUROPEAN STANDARD
EN 60966-2-1
NORME EUROPÉENNE
August 2009
EUROPÄISCHE NORM
ICS 33.120.10 Supersedes EN 60966-2-1:2003
English version
Radio frequency and coaxial cable assemblies -
Part 2-1: Sectional specification
for flexible coaxial cable assemblies
(IEC 60966-2-1:2008)
Ensembles de cordons coaxiaux Konfektionierte Koaxial- und
et de cordons pour Hochfrequenzkabel -
fréquences radioélectriques - Teil 2-1: Rahmenspezifikation
Partie 2-1: Spécification intermédiaire für flexible konfektionierte Koaxialkabel
pour cordons coaxiaux souples (IEC 60966-2-1:2008)
(CEI 60966-2-1:2008)
This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60966-2-1:2009 E
---------------------- Page: 3 ----------------------
SIST EN 60966-2-1:2009
EN 60966-2-1:2009 - 2 -
Foreword
The text of document 46/262/CDV, future edition 3 of IEC 60966-2-1, prepared by IEC TC 46, Cables,
wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60966-2-1 on
2009-07-01.
This European Standard supersedes EN 60966-2-1:2003.
The major change with respect to EN 60966-2-1:2003 is a better definition of the tests to be performed.
This sectional specification is to be read in conjunction with EN 60966-1:1999. It contains the same
clauses as that of EN 60966-1 and completes or amends them when required. When a clause of
EN 60966-1 does not appear in this standard, it applies as it is in EN 60966-1. When this standard states
"addition", "modification" or "replacement", the relevant text in Part 1 is to be adapted accordingly.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2010-04-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2012-07-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60966-2-1:2008 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 4 ----------------------
SIST EN 60966-2-1:2009
- 3 - EN 60966-2-1:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60068-2-6 - Environmental testing - EN 60068-2-6 2008
Part 2-6: Tests - Test Fc: Vibration
(sinusoidal)
1)
IEC 60096-2 - Radio-frequency cables - - -
Part 2: Relevant cable specifications
1)
IEC 60410 - Sampling plans and procedures - -
for inspection by attributes
IEC 60966-1 1999 Radio frequency and coaxial cable EN 60966-1 1999
assemblies -
Part 1: Generic specification - General
requirements and test methods
IEC 61169 Series Radio-frequency connectors EN 61169 Series
IEC 61196 Series Coaxial communication cables EN 61196 Series
IEC QC 001002 Series IEC quality assessment system for electronic - -
components (IECQ) - Rules of procedure
1) 2)
ISO 9000 - Quality management systems - EN ISO 9000 2005
Fundamentals and vocabulary
1)
Undated reference.
2)
Valid edition at date of issue.
---------------------- Page: 5 ----------------------
SIST EN 60966-2-1:2009
---------------------- Page: 6 ----------------------
SIST EN 60966-2-1:2009
IEC 60966-2-1
Edition 3.0 2008-10
INTERNATIONAL
STANDARD
Radio frequency and coaxial cable assemblies –
Part 2-1: Sectional specification for flexible coaxial cable assemblies
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
R
ICS 33.120.10 ISBN 2-8318-1008-4
Registered trademark of the International Electrotechnical Commission
---------------------- Page: 7 ----------------------
SIST EN 60966-2-1:2009
– 2 – 60966-2-1 © IEC:2008(E)
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references .5
3 Terms and definitions .5
4 Design and manufacturing requirements.6
4.1 Cable design and construction.6
4.2 Connector design and construction.6
4.3 Outline and interface dimensions.6
5 Workmanship, marking and packaging.7
6 Quality assessment .8
7 Test methods – General .8
8 Electrical tests.8
9 Mechanical robustness tests.9
10 Environmental tests .9
11 Specialized test methods.11
12 Test schedules .11
Figure 1 – Length definition of cable assemblies.7
Figure 2 – Example of a cable assembly.7
Figure 3 – Preferred arrangement for the vibration test .9
Figure 4 – Example production flow chart for a flexible cable assembly .14
Table 1 – Grouping of tests for specification purposes .12
Table 2 – Test schedule.13
Table 3 – Assignment of CQCs .15
---------------------- Page: 8 ----------------------
SIST EN 60966-2-1:2009
60966-2-1 © IEC:2008(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES –
Part 2-1: Sectional specification for flexible coaxial cable assemblies
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60966-2-1 has been prepared by IEC technical committee 46:
Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and
accessories.
This third edition cancels and replaces the second edition published in 2003. It constitutes a
technical revision.
The major change with respect to the second edition is a better definition of the tests to be
performed.
This sectional specification is to be read in conjunction with the second edition of
IEC 60966-1 (1999). It contains the same clauses as that of IEC 60966-1 and completes or
amends them when required. When a clause of IEC 60966-1 does not appear in this standard,
it applies as it is in IEC 60966-1. When this standard states "addition", "modification" or
"replacement", the relevant text in Part 1 is to be adapted accordingly.
---------------------- Page: 9 ----------------------
SIST EN 60966-2-1:2009
– 4 – 60966-2-1 © IEC:2008(E)
The text of this standard is based on the following documents:
CDV Report on voting
46/262/CDV 46/295/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
A list of all parts of the IEC 60966 series, under the general title: Radio frequency and coaxial
cable assemblies, can be found on the IEC website.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
---------------------- Page: 10 ----------------------
SIST EN 60966-2-1:2009
60966-2-1 © IEC:2008(E) – 5 –
RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES –
Part 2-1: Sectional specification for flexible coaxial cable assemblies
1 Scope
This part of IEC 60966 is a sectional specification that relates to flexible coaxial cable
assemblies operating in the transverse electromagnetic mode (TEM). It establishes uniform
requirements for testing the electrical, mechanical and climatic properties of flexible cable
assemblies composed of flexible coaxial cables and coaxial connectors.
NOTE 1 For the purposes of this sectional specification, a cable assembly is always regarded as an integral unit.
All specifications apply to the finished assembly and not to individual and non-assembled parts thereof.
NOTE 2 This sectional specification should be supplemented with detail specifications giving additional details as
required by the particular application. This application will not necessarily require all tests.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 60068-2-6, Environmental testing – Part 2-6: Tests − Test Fc: Vibration (sinusoidal)
IEC 60096-2, Radio-frequency cables – Part 2: Relevant cable specifications
IEC 60410, Sampling plans and procedures for inspection by attributes
IEC 60966-1:1999, Radio frequency and coaxial cable assemblies – Part 1: Generic
specification – General requirements and test methods
IEC 61169 (all parts), Radio-frequency connectors
IEC 61196 (all parts), Coaxial communication cables
IEC QC 001002 (all parts), IEC Quality Assessment System for Electronic Components
(IECQ) – Rules of procedure
ISO 9000, Quality management systems – Fundamentals and vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 60966-1 apply.
---------------------- Page: 11 ----------------------
SIST EN 60966-2-1:2009
– 6 – 60966-2-1 © IEC:2008(E)
4 Design and manufacturing requirements
Clause 4 of IEC 60966-1 is applicab
...