ISO 10555-4:2023

Intravascular catheters — Sterile and single-use catheters — Part 4: Balloon dilatation catheters

ISO 10555-4:2023

Name:ISO 10555-4:2023   Standard name:Intravascular catheters — Sterile and single-use catheters — Part 4: Balloon dilatation catheters
Standard number:ISO 10555-4:2023   language:English language
Release Date:13-Nov-2023   technical committee:ISO/TC 84 - Devices for administration of medicinal products and catheters
Drafting committee:ISO/TC 84 - Devices for administration of medicinal products and catheters   ICS number:11.040.25 - Syringes, needles an catheters
INTERNATIONAL ISO
STANDARD 10555-4
Third edition
2023-11
Intravascular catheters — Sterile and
single-use catheters —
Part 4:
Balloon dilatation catheters
Cathéters intravasculaires — Cathéters stériles et non réutilisables —
Partie 4: Cathéters de dilatation à ballonnets
Reference number
ISO 10555-4:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 10555-4:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 10555-4:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 2
4.1 General . 2
4.2 Detectability of the balloon position . 2
4.3 Designation of nominal size . 2
4.4 Physical requirements . 2
4.4.1 Balloon rated burst pressure (RBP) . 2
4.4.2 Balloon fatigue; freedom from leakage and damage on inflation . 2
4.4.3 Balloon deflation time . 2
4.4.4 Balloon diameter to inflation pressure (balloon compliance) . 2
4.4.5 Crossing profile . 3
4.4.6 Balloon removal . 3
4.5 Information to be supplied with the catheter . 3
Annex A (normative) Test for rated burst pressure (RBP). 4
Annex B (normative) Balloon fatigue test for freedom from leakage and damage
on inflation . 6
Annex C (normative) Test for balloon deflation time . 8
Annex D (normative) Test for balloon diameter to inflation pressure (balloon compliance) .10
Annex E (normative) Determination of crossing profile .
...

  • Relates Information
  • IEC 60300-3-7:1999

    IEC 60300-3-7:1999 - Dependability management - Part 3-7: Application guide - Reliability stress screening of electronic hardware Released:5/31/1999 Isbn:2831847974
    09-20
  • HD 571 S1:1990

    HD 571 S1:1998
    09-20
  • ISO 8130-4:1992

    ISO 8130-4:1992 - Coating powders
    09-20
  • HD 478.2.7 S1:1990

    HD 478.2.7 S1:2003
    09-19
  • ISO 8473:1988/Cor 1:1992

    ISO 8473:1988/Cor 1:1992 - Information processing systems — Data communications — Protocol for providing the connectionless-mode network service — Technical Corrigendum 1 Released:12/10/1992
    09-19
  • EN ISO 9013:2017/prA1

    EN ISO 9013:2017/oprA1:2024
    09-19
  • IEC 60118-6:1999

    IEC 60118-6:1999 - Hearing aids - Part 6: Characteristics of electrical input circuits for hearing aids Released:6/9/1999 Isbn:2831848075
    09-19
  • HD 280.3 S1:1990

    HD 280.3 S1:1999
    09-19
  • ISO 9832:1992

    ISO 9832:1992 - Animal and vegetable fats and oils -- Determination of residual technical hexane content
    09-19
  • EN 60188:1988/A1:1990

    EN 60188:1999/A1:1999
    09-18