|
Standard
ISO 21622-3
First edition
Irrigation techniques — Remote
2024-03
monitoring and control for
irrigation —
Part 3:
Interoperability
Reference number
ISO 21622-3:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 21622-3:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 21622-3:2024(E)
Contents Page
Foreword . vi
Introduction . vi
1 Scope . 1
2 Normative reference . 1
3 Terms and definitions . 2
4 Interoperability I: System architecture . 4
4.1 Levels and components of an interoperable architecture . 4
4.2 Interface specifications . 6
5 Interoperability II: exchange of data from irrigation entities . 20
5.1 General outline . 20
5.2 Static data of the irrigation entities . 20
5.3 Structure of an irrigation entity identifier (EntityID) . 28
5.4 Properties . 28
5.5 Entity events . 35
6 Interoperability III: Exchange of data from procedural elements performed in
irrigation entities . 37
6.1 General outline . 37
6.2 Statuses and actions . 37
6.3 Types of Operation recipes . 37
6.4 Types of Unit Procedure recipes . 56
6.5 Types of Procedure recipes . 58
6.6 Report . 59
6.7 Procedural element events . 62
Annex A (normative) Management interface with SOAP 1.2 . 64
A.1 Overview . 64
A.2 Requirements .
...