|
Standard
ISO 14953
Second edition
Space systems — Structural design
2024-03
— Determination of loading levels
for static qualification testing of
launch vehicles
Systèmes spatiaux — Conception des structures — Détermination
des niveaux de chargement pour un essai statique de qualification
des véhicules lanceurs
Reference number
ISO 14953:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 14953:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 14953:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Design of loading levels . 2
4.1 General .2
4.2 Calculation of qualification test loading .2
4.3 Corrected safety factor .2
4.4 Correction factors .3
4.4.1 Correction factor for thickness, K .3
min
4.4.2 Correction factor for adjacent structures, K .3
adj
4.4.3 Correction factor for thermal gradients, K .3
T
4.4.4 Correction factor for temperature, K .4
θ
4.4.5 Correction factor for dispersions, K .4
σ
4.4.6 Correction factor for geometric imperfections, K .4
imp
4.5 Comparison of results .5
4.6 Implementation of this document .5
Bibliography . 6
© ISO 2024 – All rights reserved
iii
---------------------- Page: 3 ----------------------
ISO 14953:2024(en)
Foreword
ISO (the Inte
...