|
Standard
ISO 13265
Second edition
Thermoplastics piping systems
2024-05
for non-pressure underground
drainage and sewerage — Joints for
buried non-pressure applications
— Test method for the long-term
sealing performance of joints with
elastomeric seals by estimating the
sealing pressure
Systèmes de canalisations thermoplastiques pour branchements
et collecteurs d'assainissement enterrés sans pression —
Assemblages pour applications enterrées sans pression —
Méthode d'essai de la performance à long terme des assemblages
avec garnitures d'étanchéité en élastomère par l'estimation de la
pression d'étanchéité
Reference number
ISO 13265:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 13265:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 13265:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols . 2
5 Principle . 2
6 Apparatus . 3
7 Test pieces . 4
7.1 General .4
7.2 Assembly .4
7.3 Leaktightness of the test system.4
8 Test procedure . 5
8.1 General .5
8.2 Procedure for determining the pressure .5
9 Calculation and expression of results . 6
9.1 Calculation .
...