|
Standard
ISO 13506-1
Second edition
Protective clothing against heat
2024-06
and flame —
Part 1:
Test method for complete
garments — Measurement of
transferred energy using an
instrumented manikin
Habillement de protection contre la chaleur et les flammes —
Partie 1: Méthode d'essai pour vêtements complets — Mesurage
de l'énergie transférée à l'aide d'un mannequin instrumenté
Reference number
ISO 13506-1:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 13506-1:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 13506-1:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Overview . 4
4.1 General .4
4.2 Heat flux - energy balance on the sensor .4
4.3 Assumptions to achieve the required heat flux .5
5 Apparatus . 6
5.1 Instrumented manikin .6
5.2 Posture of the manikin .9
5.3 Manikin sensors .10
5.3.1 Principle .10
5.3.2 Number of manikin sensors .11
5.3.3 Manikin sensor-measuring capability . 12
5.3.4 Manikin sensor specification . 12
5.3.5 Manikin sensor positioning .
...