IEC 60384-17:2019

Fixed capacitors for use in electronic equipment - Part 17: Sectional specification - Fixed metallized polypropylene film dielectric AC and pulse capacitors

IEC 60384-17:2019

Name:IEC 60384-17:2019   Standard name:Fixed capacitors for use in electronic equipment - Part 17: Sectional specification - Fixed metallized polypropylene film dielectric AC and pulse capacitors
Standard number:IEC 60384-17:2019   language:English language
Release Date:17-Mar-2019   technical committee:TC 40 - Capacitors and resistors for electronic equipment
Drafting committee:MT 60384-17 - TC 40/MT 60384-17   ICS number:01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION

IEC 60384-17
Edition 3.0 2019-03
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Fixed capacitors for use in electronic equipment –
Part 17: Sectional specification – Fixed metallized polypropylene film dielectric
AC and pulse capacitors




your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

.
IEC 60384-17
Edition 3.0 2019-03
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Fixed capacitors for use in electronic equipment –

Part 17: Sectional specification – Fixed metallized polypropylene film dielectric

AC and pulse capacitors
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.060.30 ISBN 978-2-8322-6685-4

– 2 – IEC 60384-17:2019 RLV © IEC 2019
CONTENTS
FOREWORD . 6
1 General . 8
1.1 Scope . 8
1.2 Object . 8
1.3 Normative references . 8
1.4 Information to be given in a detail specification . 9
1.4.1 General . 9
1.4.2 Outline drawing and dimensions . 9
1.4.3 Mounting . 10
1.4.4 Ratings and characteristics . 10
1.4.5 Marking . 11
1.5 Terms and definitions . 11
1.5.1 General . 11
1.5.2 Performance and stability grades . 11
1.5.3 Rated voltages . 12
1.6 Marking . 12
1.6.1 General . 12
1.6.2 Information for marking . 12
1.6.3 Marking on capacitors . 13
1.6.4 Marking on packaging . 13
1.6.5 Additional marking . 13
2 Preferred ratings and characteristics . 13
2.1 Preferred characteristics . 13
2.1.1 General . 13
2.1.2 Preferred climatic categories . 13
2.2 Preferred values of ratings . 14
2.2.1 Rated Nominal capacitance (CR CN) . 14
2.2.2 Tolerances on rated nominal capacitance . 14
2.2.3 Rated Nominal capacitance with associated tolerance values . 14
2.2.4 Rated AC voltage (U or U ) . 14
RAC R~
2.2.5 Category AC voltage (U or U ) . 14
CAC C~
2.2.6 Rated temperature . 15
2.2.7 Rated AC current (when required in the detail specification if required) . 15
2.2.8 Rated pulse voltage (if required) . 15
3 Quality assessment procedures . 15
3.1 Primary stage of manufacture . 15
3.2 Structurally similar components . 16
3.3 Certified test records of released lots . 16
3.4 Qualification approval procedures . 16
3.4.1 General . 16
3.4.2 Qualification approval on the basis of the fixed sample size procedure . 16
3.5 Quality conformance inspection . 34
3.5.1 Formation of inspection lots . 34
3.5.2 Test schedule . 34
3.5.3 Delayed delivery . 34
3.5.4 Assessment levels . 34

4 Test and measurement procedures . 36
4.1 Visual examination and check of dimensions . 36
4.1.1 General . 36
4.1.2 Visual examination and check of dimensions . 36
4.1.3 Requirements . 37
4.2 Electrical tests . 37
4.2.1 Voltage proof for AC capacitors . 37
4.2.2 Capacitance . 38
4.2.3 Tangent of loss angle (tan δ) . 39
4.2.4 Insulation resistance . 40
4.2.5 Inductance (if required) . 41
4.2.6 Characteristics depending on temperature (if required in the detail
specification) . 41
4.3 Robustness of terminations . 42
4.3.1 General . 42
4.3.2 Initial measurements inspections . 42
4.3.3 Final inspections and requirements . 43
4.4 Resistance to soldering heat . 43
4.4.1 General . 43
4.4.2 Initial inspections . 43
4.4.3 Test Conditions . 43
4.4.4 Recovery . 43
4.4.5 Final inspections, measurements and requirements . 43
4.5 Solderability . 43
4.5.1 General . 43
4.5.2 Test conditions . 43
4.5.3 Final inspections and requirements . 44
4.6 Rapid change of temperature . 44
4.6.1 General . 44
4.6.2 Initial inspections . 44
4.6.3 Test conditions . 44
4.6.4 Final inspections and requirements . 44
4.7 Vibration . 44
4.7.1 General . 44
4.7.2 Initial inspections . 45
4.7.3 Test conditions . 45
4.7.4 Final inspections, measurements and requirements . 45
4.8 Bump (repetitive shock) . 45
4.8.1 General . 45
4.8.2 Initial measurements . 45
4.8.3 Test conditions . 45
4.8.4 Final inspections, measurements and requirements . 45
4.9 Shock . 46
4.9.1 General . 46
4.9.2 Initial measurements . 46
4.9.3 Test conditions . 46
4.10 Climatic sequence. 46
4.10.1 General . 46
4.10.2 Initial measurements . 46

– 4 – IEC 60384-17:2019 RLV © IEC 2019
4.10.3 Dry heat .
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27