|
IEC 60794-2-11
Edition 3.0 2019-04
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Optical fibre cables –
Part 2-11: Indoor optical fibre cables – Detailed specification for simplex and
duplex cables for use in premises cabling
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
IEC 60794-2-11
Edition 3.0 2019-04
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Optical fibre cables –
Part 2-11: Indoor optical fibre cables – Detailed specification for simplex and
duplex cables for use in premises cabling
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.180.10 ISBN 978-2-8322-6839-1
– 2 – IEC 60794-2-11:2019 RLV © IEC 2019
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General requirements . 6
5 Particular requirements . 7
5.1 Fibre selection for cable testing . 7
5.2 Environmental requirements – Temperature cycling . 7
5.3 Transmission requirements . 7
5.3.1 Attenuation of cabled fibre . 7
5.3.2 Fibre bandwidth requirements . 8
Bibliography . 9
Table 1 – Multimode cable maximum attenuation coefficient (dB/km) . 7
Table 2 – Single-mode cable maximum attenuation coefficient (dB/km) . 8
Table 3 – Minimum multimode fibre bandwidth (MHz·km) . 8
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
OPTICAL FIBRE CABLES –
Part 2-11: Indoor optical fibre cables –
Detailed specification for simplex and duplex cables
for use in premises cabling
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
This redline version of the official IEC Standard allows the user to identify the changes
made to the previous edition. A vertical bar appears in the margin wherever a change
has been made. Additions are in green text, deletions are in strikethrough red text.
– 4 – IEC 60794-2-11:2019 RLV © IEC 2019
International Standard IEC 60794-2-11 has been prepared by subcommittee 86A: Fibres and
cables, of IEC technical committee 86: Fibre optics.
This third edition cancels and replaces the second edition published in 2012. It constitutes a
technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) incorporation of the OM5 cabled fibre performance category;
b) incorporation of the OS1a cabled fibre performance category;
c) cabled fibre performance categories OM1, OM2 and OS1 are no longer normative, and are
retained for information.
The text of this International Standard is based on the following documents:
FDIS Report on voting
86A/1924/FDIS 86A/1934/RVD
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all the parts in the IEC 60794 series, published under the general title Optical fibre
cables, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The “colour inside” logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this publication using a colour printer.
OPTICAL FIBRE CABLES –
Part 2-11: Indoor optical fibre cables –
Detailed specification for simplex and duplex cables
for use in premises cabling
1 Scope
This part of IEC 60794 presents the detailed requirements specific to this type of cable to
ensure compatibility with the series of International Standards ISO/IEC 11801, Information
technology – Generic cabling for customer premises (Parts 1 to 6).
The requirements of family specification IEC 60794-2-10:2011 are applicable to cables
covered by this document.
Particular requirements detailed in Clause 4 define either a specific option in relation to the
requirements of IEC 60794-2-10:2011 or additional requirements.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
They complete the normative references already listed in the generic specification
(IEC 60794-1-1:2011, and IEC 60794-1-2:2003,) and in the sectional specification
(IEC 60794-2:2002, Clause 2) or in the family specification (IEC 60794-2-10:2011, Clause 2).
IEC 60793-2-10:2007 —, Optical fibres – Part 2-10: Product specifications – Sectional
specification for category A1 multimode fibres
IEC 60793-2-50:2008 2018, Optical fibres – Part 2-50: Product specifications – Sectional
specification for class B single-mode fibres
IEC 60794-1-1:2011 2015, Optical fibre cables – Part 1-1: Generic specification – General
IEC 60794-1-2:2003, Optical fibre cables – Part 1-2: Generic specification – Basic optical
cable test procedures
IEC 60794-2:2002, Optical fibre cables – Part 2: Indoor cables – Sectional specification
IEC 60794-2-10:2011, Optical fibre cables − Part 2-10: Indoor optical fibre cables − Family
specification for simplex and duplex cables
_________
Edition 7 under preparation. Stage at the time of publication: IEC DECFDIS 60793-2-10:2019.
– 6 – IEC 60794-2-11:2019 RLV © IEC 2019
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
4 General requirements
The cable shall comply with the family specification IEC 60794-2-10:2011 and meet the
requirements that are defined in it.
The optical fibre contained in the cables which are covered by this document shall comply
with one of the following International Standards and meet the normative requirements
defined within them as applicable:
• IEC 60793-2-50:2008, Annex A [Single-mode B1.1 fibre]
• IEC 60793-2-50:2008, Annex C [Single-mode B1.3 fibre]
• IEC 60793-2-50:2008, Annex G [Single-mode B6_a1 and B6_a2 fibre]
• IEC 60793-2-10:2007, Annex A [Multimode A1a.1, 50 µm core fibre]
• IEC 60793-2-10:2007, Annex A [Multimode A1a.2, 50 µm core fibre]
• IEC 60793-2-10:2007, Annex A [Multimode A1a.3, 50 µm core fibre]
• IEC 60793-2-10:2007, Annex B [Multimode A1b, 62.5 µm core fibre]
• IEC 60793-2-50:2018, Annex A (single-mode B-652.D fibre);
• IEC 60793-2-50:2018, Annex F (single-mode B-657 fibres);
• IEC 60793-2-10:— , Annex A (multimode A1-OM3 fibre);
• IEC 60793-2-10:—, Annex A (multimode A1-OM4 fibre);
• IEC 60793-2-10:—, Annex A (multimode A1-OM5 fibre).
To ensure compatibility with ISO/IEC 11801 (all parts), optical performance level requirements
are presented in terms of the performance classification codes for cabled optical fibre as
follows:
• OS1 Single-mode fibre, B1.1, B1.3 category or sub-cat
...