|
IEC 61158-6-19
Edition 4.0 2019-06
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 6-19: Application layer protocol specification – Type 19 elements
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
IEC 61158-6-19
Edition 4.0 2019-06
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 6-19: Application layer protocol specification – Type 19 elements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.40; 35.100.70; 35.110 ISBN 978-2-8322-7012-7
– 2 – IEC 61158-6-19:2019 © IEC 2019
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
1.1 General . 7
1.2 Specifications . 8
1.3 Conformance . 8
2 Normative references . 8
3 Terms, definitions, symbols, abbreviations and conventions . 9
3.1 Referenced terms and definitions . 9
3.1.1 ISO/IEC 7498-1 terms . 9
3.1.2 ISO/IEC 8822 terms . 9
3.1.3 ISO/IEC 9545 terms . 9
3.1.4 ISO/IEC 8824-1 terms . 9
3.1.5 Fieldbus Data Link Layer terms . 10
3.2 Additional terms and definitions . 10
3.3 Additional abbreviations and symbols . 11
3.4 Conventions . 12
4 Abstract syntax . 12
5 Transfer syntax . 12
5.1 Introduction . 12
5.2 RTC PDU merged abstract and transfer syntax . 12
6 Structure of FAL protocol state machines . 12
7 AP-context state machine . 14
7.1 Overview. 14
7.2 States . 14
7.2.1 Idle . 14
7.2.2 Running . 14
7.3 States, events and transitions . 15
8 FAL service protocol machine (FSPM) . 15
8.1 Overview. 15
8.2 MGT services . 15
8.2.1 Get network status . 15
8.2.2 Get device status . 15
8.2.3 Network status change report . 15
8.2.4 Device status change report . 15
8.2.5 Set device status . 15
8.2.6 Enable RTC . 15
8.2.7 Enable hot-plug . 16
8.2.8 Notify RTC . 16
8.2.9 Disable RTC . 16
8.2.10 Notify error . 16
8.3 IDN services . 16
8.3.1 Read . 16
8.3.2 Write. 16
8.4 CYCIDN services . 16
8.4.1 Read_cyclic . 16
8.4.2 Write_cyclic . 16
8.4.3 Notify_cyclic . 16
9 Application relationship protocol machine (ARPM) . 16
9.1 Overview. 16
9.2 Master ARPM . 17
9.2.1 Overview . 17
9.2.2 State descriptions . 17
9.2.3 States, events and transitions . 18
9.3 Slave ARPM . 18
9.3.1 Overview . 18
9.3.2 State descriptions . 18
9.3.3 States, events and transitions . 19
9.4 Primitives received from the FSPM . 19
9.4.1 FSP-get network status. 19
9.4.2 FSP-get device status . 19
9.4.3 FSP-set device status . 19
9.4.4 FSP-enable RTC . 20
9.4.5 FSP-enable Hot-plug . 20
9.4.6 FSP-disable RTC . 20
9.4.7 FSP-read . 20
9.4.8 FSP-write . 20
9.4.9 FSP-read_cyclic . 20
9.4.10 FSP-write_cyclic . 20
9.5 Indications received from the DMPM . 21
9.5.1 ARP-network status change report. 21
9.5.2 ARP-device status change report . 21
9.5.3 ARP-notify RTC enabled . 21
9.5.4 ARP-notify RTC disabled . 21
9.5.5 ARP-notify_cyclic. 21
9.5.6 ARP-notify Error . 21
10 DLL mapping protocol machine (DMPM) . 21
10.1 Overview. 21
10.2 Primitives received from the ARPM . 22
10.3 Indications received from the DL . 22
Bibliography . 23
Figure 1 – Relationships among protocol machines and adjacent layers . 13
Figure 2 – APCSM state diagram . 14
Figure 3 – ARPM master AR state diagram . 17
Figure 4 – ARPM slave AR state diagram . 18
Table 1 – RTC PDU attribute format. 12
Table 2 – APCSM state-event table . 15
Table 3 – Master ARPM state-event table . 18
Table 4 – Slave ARPM state-event table . 19
Table 5 – ARPM to DL mapping . 22
Table 6 – DL to ARPM mapping . 22
– 4 – IEC 61158-6-19:2019 © IEC 2019
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL COMMUNICATION NETWORKS –
FIELDBUS SPECIFICATIONS –
Part 6-19: Application layer protocol specification –
Type 19 elements
FOREWORD
1) The International Electrotechnical Commission (
...