|
IEC 60364-7-706
Edition 2.0 2019-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Low-voltage electrical installations –
Part 7-706: Requirements for special installations or locations – Conducting
locations with restricted movement
Installations électriques basse tension –
Partie 7-706: Exigences pour les installations ou emplacements spéciaux –
Enceintes conductrices exiguës
IEC 60364-7-706:2005-10/AMD1:2019-09(en-fr)
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - Electropedia - www.electropedia.org
webstore.iec.ch/advsearchform Le premier dictionnaire d'électrotechnologie en ligne au
La recherche avancée permet de trouver des publications IEC monde, avec plus de 22 000 articles terminologiques en
en utilisant différents critères (numéro de référence, texte, anglais et en français, ainsi que les termes équivalents dans
comité d’études,…). Elle donne aussi des informations sur les 16 langues additionnelles. Egalement appelé Vocabulaire
projets et les publications remplacées ou retirées. Electrotechnique International (IEV) en ligne.
IEC Just Published - webstore.iec.ch/justpublished Glossaire IEC - std.iec.ch/glossary
Restez informé sur les nouvelles publications IEC. Just 67 000 entrées terminologiques électrotechniques, en anglais
Published détaille les nouvelles publications parues. et en français, extraites des articles Termes et Définitions des
Disponible en ligne et une fois par mois par email. publications IEC parues depuis 2002. Plus certaines entrées
antérieures extraites des publications des CE 37, 77, 86 et
Service Clients - webstore.iec.ch/csc CISPR de l'IEC.
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
[email protected] .
IEC 60364-7-706
Edition 2.0 2019-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Low-voltage electrical installations –
Part 7-706: Requirements for special installations or locations – Conducting
locations with restricted movement
Installations électriques basse tension –
Partie 7-706: Exigences pour les installations ou emplacements spéciaux –
Enceintes conductrices exiguës
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 91.140.50; 29.020 ISBN 978-2-8322-7333-3
– 2 – IEC 60364-7-706:2005/AMD1:2019
© IEC 2019
FOREWORD
This amendment has been prepared by IEC technical committee 64: Electrical installations
and protection against electric shock.
The text of this amendment is based on the following documents:
FDIS Report on voting
64/2380/FDIS 64/2394/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
___________
FOREWORD
Add the following new text:
The reader's attention is drawn to the fact that Annex A lists all of the “in-some-country”
clauses on differing practices of a permanent or less permanent nature relating to the subject
of this standard.
INTRODUCTION
Replace the existing text with the following new text:
For the purpose of this part of IEC 60364 (IEC 60364-7-706) the requirements of the general
Parts 1 to 6 and Parts 8 of IEC 60364 apply.
The IEC 60364-7-7XX parts of IEC 60364 contain particular requirements for special
installations or locations which are based on the requirements of the general parts of
IEC 60364 (IEC 60364-1 to IEC 60364-6 and IEC 60364-8). These IEC 60364-7-7XX parts are
considered in conjunction with the requirements of the general parts.
© IEC 2019
The particular requirements of this part of IEC 60364 supplement, modify or replace certain of
the requirements of the general parts of IEC 60364 being valid at the time of publication of
this part. The absence of reference to the exclusion of a part or a clause of a general part
means that the corresponding clauses of the general part are applicable (undated reference).
Requirements of other 7XX parts being relevant for installations covered by this part also
apply. This part may therefore also supplement, modify or replace certain of these
requirements valid at the time of publication of this part.
The clause numbering of this part follows the pattern and corresponding references of
IEC 60364. The numbers following the particular number of this part are those of the
corresponding parts, or clauses of the other parts of the IEC 60364 series, valid at the time of
publication of this part, as indicated in the normative references of this document (dated
reference).
If requirements or explanations additional to those of the other parts of the IEC 60364 series
are needed, the numbering of such items appears as 706.101, 706.102, 706.103, etc.
In the case where new or amended general parts with modified numbering were published
after this part was issued, the clause numbers referring to a general part in this Part 706 may
no longer align with the latest edition of the general part. Dated references should be
observed.
706.1 Scope
Replace the existing text with the following new text:
The particular requirements of this part of IEC 60364 apply to:
• fixed equipment within conducting locations with restricted movement; and
• supplies to equipment used within conducting locations with restricted movement.
Add, after the Scope, the following new Subclauses 706.2 and 706.3:
706.2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
IEC 60364-4-41:2005, Low-voltage electrical installations – Part 4-41: Protection for safety –
Protection against electric shock
IEC 60364-4-41:2005/AMD1:2017
706.3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
– 4 – IEC 60364-7-706:2005/AMD1:2019
© IEC 2019
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
706.3.1
conducting location with restricted movement
location surrounded by mainly extraneous-conductive-parts and where contact through one or
more points on a person’s body with the extraneous-conductive-parts is likely and where there
is limited possibility of interrupting this contact
706.410.3 Application of measures of protection against electric shock
Replace the existing title of 706.410.3 and add the following headers of 706.4 and 706.41 as
follows:
706.4 Protection for safety
706.41 Protection against electric shock
706.410.3 General requirements
Add, at the end of existing Subclause 706.410.3.1.6, the following new text:
706.410.3.3
Replace the existing text with the following:
For the supply to mobile equipment, one of the following protective measures shall be applied:
• SELV in accordance with IEC 60364-4-41:2005, Clause 414, or
• electrical separation for the supply of one item of current using equipment in accordance
with IEC 60364-4-41:2005, Clause 413.
NOTE An isolating transformer can have several secondary windings.
For the supply to fixed equipment, one of the following protective measures shall be applied:
• automatic disconnection of the supply in accordance with IEC 60364-4-41:2005 and
IEC 60364-4-41:2005/AMD1:2017, Clause 411 together with additional protection by
supplementary equipotential bonding in accordance with IEC 60364-4-41:2005 and
IEC 60364-4-41:2005/AMD1:2017, 415.2, or
• SELV in accordance with IEC 60364-4-41:2005, Clause 414, or
• PELV in accordance with IEC 60364-4-41:2005, Clause 414, together with equipotential
bonding between all exposed-conductive-parts and extraneous-conductive-parts and the
connection of the PELV system to earth, or
• electrical separation for the supply of one item of current using equipment in accordance
with IEC 60364-4-41:2005, Clause 413, or
• double or reinforced insulation in accordance with IEC 60364-4-41:2005 and IEC 60364-4-
41:2005/AMD1:2017, Clause 412 together with additional protection by the use of a
residual current device (RCD) with a rated residual operating current not exceeding
30 mA.
706.410.3.5
Replace the requirement with the following:
The protective measures of obstacles and placing out of reach in accordance with
IEC 60364-4-41:2005, Annex B shall not be used.
© IEC 2019
706.413 Protection against indirect contact
Replace the existing title of 706.413 with the following new title:
706.413 Protective measure: electrical separation
706.413.1.2.3 Equipotential bonding and functional earth
Add, at the end of existing Subclause 706.413.1.2.3, the following new text:
706.413.3 Requirements for fault protection
706.413.3.2
Add the following requirement:
The source shall be situated outside the conducting location with restricted movement, unless
the source is part of the fixed installation within the location.
Add, at the end of existing Subclause 706.413.5.1.1, the new Subclauses 706.414, 706.415
and Annex A as follows:
706.414 Protective measure: extra-low-voltage provided by SELV and PELV
706.414.3 Sources for SELV and PELV
The following requirements are added:
706.414.3.101 Sources for SELV and PELV shall be situated outside the conducting location
with restricted movement, unless they are part of the fixed installation within the conducting
location with restricted movement.
706.414.4 Requirements for SELV and PELV circuits
706.414.4.5
Replace the first paragraph and first two dashed items with the following:
If the nominal voltage exceeds 25 V AC or 60 V DC, or if the equipment is immersed, basic
protection shall be provided for SELV and PELV circuits by:
• insulation in accordance with IEC 60634-4-41:2005, Clause A.1, or
• barriers or enclosures in accordance with IEC 60634-4-41:2005, Clause A.2.
706.415 Additional protection
706.415.2 Additional protection: supplementary protective equipotential bonding
706.4
...