IEC TR 61547-1:2020

Equipment for general lighting purposes - EMC immunity requirements - Part 1: Objective light flickermeter and voltage fluctuation immunity test method

IEC TR 61547-1:2020

Name:IEC TR 61547-1:2020   Standard name:Equipment for general lighting purposes - EMC immunity requirements - Part 1: Objective light flickermeter and voltage fluctuation immunity test method
Standard number:IEC TR 61547-1:2020   language:English language
Release Date:30-Jun-2020   technical committee:TC 34 - Lighting
Drafting committee:WG 5 - TC 34/WG 5   ICS number:01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION

IEC TR 61547-1
Edition 3.0 2020-07
TECHNICAL
REPORT
colour
inside
Equipment for general lighting purposes – EMC immunity requirements –
Part 1: Objective light flickermeter and voltage fluctuation immunity test method




your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

.
IEC TR 61547-1
Edition 3.0 2020-07
TECHNICAL
REPORT
colour
inside
Equipment for general lighting purposes – EMC immunity requirements –

Part 1: Objective light flickermeter and voltage fluctuation immunity test method

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.140.20 ISBN 978-2-8322-8532-9

– 2 – IEC TR 61547-1:2020 © IEC 2020
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms, definitions, abbreviated terms and symbols . 9
3.1 Terms and definitions . 9
3.2 Abbreviated terms . 10
3.3 Symbols . 11
4 General . 11
5 Light flickermeter . 13
6 Voltage fluctuation disturbance signal . 13
6.1 General . 13
6.2 Mains signal parameters . 14
6.3 Disturbance signal parameters and test levels . 15
7 Test setup and equipment . 16
7.1 General . 16
7.2 Test voltage . 17
7.3 Optical test environment . 17
7.4 Light sensor and amplifier . 18
7.5 Signals to be measured . 18
7.6 Signal processing . 18
7.6.1 Anti-aliasing filter . 18
7.6.2 Sampling frequency . 19
7.6.3 Signal resolution . 19
8 Verification procedure . 21
8.1 General . 21
8.2 Light flickermeter . 21
8.3 Mains voltage parameters without modulation . 22
8.3.1 Nominal voltage level . 22
8.3.2 Mains frequency . 22
8.4 Voltage fluctuation level . 22
8.4.1 General . 22
8.4.2 Option 1: measure the actual modulation frequencies and voltage levels . 22
V
8.4.3 Option 2: measure values using a flickermeter . 22
P
st
8.5 Light sensor and amplifier . 23
8.6 Test environment . 23
8.7 Light flicker noise . 23
9 Test procedure . 24
9.1 General . 24
9.2 Measuring the intrinsic flicker performance . 25
9.3 Testing the flicker immunity against voltage fluctuations . 26
9.4 Dimmer compatibility testing . 26
9.5 Controlgear testing . 27
10 Conditions during testing . 27
11 Evaluation of the test result . 28

12 Test report . 28
Annex A (informative) Specification of the light flickermeter . 29
A.1 Voltage flickermeter modifications . 29
A.2 Specification of the light flickermeter . 30
A.2.1 General . 30
A.2.2 Block a: illuminance adapter . 30
A.2.3 Block b: weighting filters . 30
A.2.4 Block c: squaring multiplier, sliding mean filter and scaling . 31
A.2.5 Block d: statistical analysis . 31
A.3 Verification of the light flickermeter . 32
LM
A.4 Example of implementation in MATLAB . 33
P
st
Annex B (informative) Uncertainty considerations . 34
B.1 General . 34
B.2 General symbols . 34
B.3 Measurand . 34
B.4 Influence quantities . 34
B.5 Uncertainty budget . 36
Annex C (informative) Examples of test results of lighting equipment . 38
LM
C.1 Test without voltage fluctuations ( ) . 38
P
st
LM
C.2 Test with (intentional) voltage fluctuations (I) . 38
P
st
C.3 Test under dimming conditions. 42
LM
Annex D (informative) Guidance for testing based on test type . 44
P
st
Bibliography . 45

Figure 1 – Full EMC approach for mains voltage fluctuations . 12
Figure 2 – Illustration of the mains test signal including a rectangular modulated
voltage fluctuation (see Equation (1)) . 14
Figure 3 – Block diagram voltage-fluctuation immunity test . 17
Figure 4 – Example of a recorded mains voltage fluctuation and illuminance signal of a

60 W incandescent lamp . 21
LM
P
Figure 5 – Measuring . 26
st
LM
P
Figure 6 – Measuring (I) . 26
st
Figure 7 – Dimmer compatibility testing . 26
Figure 8 – Controlgear testing . 27
Figure A.1 –Structure of the IEC 61000-4-15 flickermeter that uses voltage as input . 29
Figure A.2 – Structure of the light flickermeter based on a modified voltage flickermeter . 29
Figure A.3 – Flickermeter response to different waveshapes . 33
LM
Figure C.1 – Graphical P I results for three EUTs with rectangular modulation at
( )
st
V
five frequencies ( P = 1) . 39
st
Figure C.2 – EUT1: recorded signals (no mains voltage modulation) . 40
Figure C.3 – EUT1: recorded signals (with modulation) . 41

– 4 – IEC TR 61547-1:2020 © IEC 2020
Figure C.4 – EUT2: relative illuminance – Mains voltage modulation d = 0,407 % at
V
13,5 Hz ( P = 1) . 42
st
Figure C.5 – EUT3: relative illuminance – Mains voltage modulation d = 0,407 % at
V
13,5 Hz ( P = 1) . 42
st
LM
Figure C.6 – Graphical (C) results for four EUTs under dimming conditions . 43
P
st
Table 1 – Voltage fluctuations – Test specification of voltage fluctuations applied at
input AC mains 120/230 V and 50/60 Hz . 16
LM
Table 2 – Guidance for P testing . 25
st
Table A.1 – Test specification of illuminance fluctuations for lightmeter classifier . 32
Table B.1 – In
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27