|
ISO/IEC 30144
Edition 1.0 2020-10
INTERNATIONAL
STANDARD
colour
inside
Internet of things (IOT) – Wireless sensor network system supporting electrical
power substation
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about
ISO/IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address
below or your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
ISO/IEC 30144
Edition 1.0 2020-10
INTERNATIONAL
STANDARD
colour
inside
Internet of things (IOT) – Wireless sensor network system supporting electrical
power substation
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.240.10; 35.110 ISBN 978-2-8322-8941-9
– 2 – ISO/IEC 30144:2020 ISO/IEC 2020
CONTENTS
FOREWORD . 4
INTRODUCTION . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Symbols and abbreviated terms . 9
5 Intelligent wireless sensor network system supporting electrical power substation . 10
5.1 System View . 10
5.1.1 System overview . 10
5.1.2 Subsystems and their relationships. 13
5.2 Communications View . 15
5.2.1 Communications overview . 15
5.2.2 Sensor nodes . 16
5.2.3 Gateways . 17
5.2.4 Communication interfaces in the iWSN system . 18
6 Technical requirements for the iWSN system supporting electrical power
substations . 19
6.1 System functional requirements . 19
6.1.1 Information acquisition and collection . 19
6.1.2 Device management . 19
6.1.3 Data analysis . 19
6.1.4 Data display . 19
6.1.5 Warning and response . 20
6.1.6 Network communication . 20
6.1.7 System privilege management . 20
6.1.8 Collaborative information process (CIP) and decision support. 20
6.2 System performance requirements . 20
6.2.1 Performance requirements of sensor node. 20
6.2.2 Performance requirements of gateway . 23
6.2.3 Performance requirements of control subsystem for sensor network . 25
Annex A (informative) Sensor network reference architecture from ISO/IEC 29182-3 . 27
A.1 Overview of sensor network interfaces . 27
A.2 Sensor node physical reference architecture . 29
A.3 Functional model of the sensor network . 30
Annex B (informative) The sensor models in IEC 61850 . 31
Bibliography . 35
Figure 1 – System overview of the iWSN system supporting electrical power substation . 11
Figure 2 – Communications overview of the iWSN system supporting electrical power
substation . 16
Figure A.1 – Overview of sensor network interfaces in a sensor node, sensor node
to sensor node, and sensor node to the external environment . 27
Figure A.2 – Sensor networks system architecture – Layer focused . 28
Figure A.3 – Sensor node physical reference architecture . 29
Figure A.4 – Functional model of the sensor network . 30
Table 1 – Mapping between the entities in the System View and the domains
of the IoT RA . 12
Table 2 – Interface for functional subsystem of sensor networks . 18
Table B.1 – Sensor models in IEC 61850 . 31
– 4 – ISO/IEC 30144:2020 ISO/IEC 2020
INTERNET OF THINGS (IOT) –
WIRELESS SENSOR NETWORK SYSTEM
SUPPORTING ELECTRICAL POWER SUBSTATION
FOREWORD
1) ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)
form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC
participate in the development of International Standards through technical committees established by the
respective organization to deal with particular fields of technical activity. ISO and IEC technical committees
collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental,
in liaison with ISO and IEC, also take part in the work.
2) The formal decisions or agreements of IEC and ISO on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested IEC and ISO National bodies.
3) IEC and ISO documents have the form of recommendations for international use and are accepted by IEC and
ISO National bodies in that sense. While all reasonable efforts are made to ensure that the technical content of
IEC and ISO documents is accurate, IEC and ISO cannot be held responsible for the way in which they are used
or for any misinterpretation by any end user.
4) In order to promote international uniformity, IEC and ISO National bodies undertake to apply IEC and ISO
documents transparently to the maximum extent possible in their national and regional publications. Any
divergence between any IEC and ISO document and the corresponding national or regional publication shall be
clearly indicated in the latter.
5) IEC and ISO do not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC and ISO marks of conformity. IEC and ISO are not
responsible for any services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this document.
7) No liability shall attach to IEC and ISO or their directors, employees, servants or agents including individual
experts and members of its technical committees and IEC and ISO National bodies for any personal injury,
property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including
legal fees) and expenses arising out of the publication, use of, or reliance upon, this ISO/IEC document or any
other IEC and ISO documents.
8) Attention is drawn to the Normative references cited in this document. Use of the referenced publications is
indispensable for the correct application of this document.
9) Attention is drawn to the possibility that some of the elements of this ISO/IEC document may be the subject of
patent rights. IEC and ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO/IEC 30144 has been prepared by subcommittee 41: Internet of
Things and related technologies, of ISO/IEC joint technical committee 1: Information technology.
The text of this International Standard is based on the following documents:
FDIS Report on voting
JTC1-SC41/163/FDIS JTC1-SC41/176/RVD
Full information on the voting for the approval of this International Standard can be found in the
report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates that it
contains colours which are considered to be useful for the correct understanding of its
contents. Users should therefore print this document using a colour printer.
INTRODUCTION
The data collected from various types of electrical equipment is sparsely located, and on-line
transmission of the data helps to collaboratively aggregate and analyse them in real-time.
Transitioning to the smart electrical power substation using wireless communication among the
sensor nodes – i.e. wireless sensor network (WSN) – requires systems architecture provisioning
automated data collection from the electrical equipment, which allows collaborative data
processing, sends automatic alerts, provides preventive actions, and potentially takes
corrective actions for certain situations.
Electrical power substation communications should be designed to support scalability,
interoperability, autonomous fault correction, and other key attributes. The intelligent wireless
sensor network (iWSN) is inherently flexible and scalable in its capabilities and in operations
including in the size of its converge areas; however, depending on the geographical (e.g. urban,
suburban, remote location) and structural (both natural and man-made) situations, the
installation architecture should ensure the fidelity of all sensor nodes’ wireless connectivity.
Furthermore, the WSNs can support either distributed or decentralized network architecture.
The wired substation network typically uses high-availability seamless ring (HSR) and parallel
redundancy protocol (PRP) protocols (see IEC 62439-3, IEC 61850-8-1 and IEC 61850-9-2) to
provide seamless failover against failure of any network component. For the iWSN, it is also
important to have the key iWSN network components (e.g. sensor nodes) from data
communication failure. Therefore it is important to select wireless sensor network architecture
for a substation which overcomes the potential issue of a single point of failure in the wireless
sensor network, for example, by installation architecture, the use of PRP to improve packet loss
and timing behaviour in wireless network, or a combination of these.
This document introduces iWSN as a system which helps to make the power substation sma
...