|
IEC TR 62977-5-2
Edition 1.0 2021-03
TECHNICAL
REPORT
colour
inside
Electronic displays –
Part 5-2: Visual assessment – Colour discrimination according to viewing
direction
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
.
IEC TR 62977-5-2
Edition 1.0 2021-03
TECHNICAL
REPORT
colour
inside
Electronic displays –
Part 5-2: Visual assessment – Colour discrimination according to viewing
direction
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.120 ISBN 978-2-8322-9514-4
– 2 – IEC TR 62977-5-2:2021 © IEC 2021
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviated terms . 7
3.1 Terms and definitions . 7
3.2 Abbreviated terms . 8
4 Introduction to visual assessment . 8
5 Standard measuring equipment and coordinate system . 10
5.1 Light measuring devices . 10
5.2 Viewing direction coordinate system . 10
6 Test patterns . 11
6.1 Geometrical construction . 11
6.2 Colour assignment . 12
6.3 Dots fill factor . 14
7 Visual assessment method . 15
7.1 General description of the assessment . 15
7.2 Test room conditions . 15
7.3 DUT parameters . 16
7.4 Observers . 16
7.5 Instructions for visual assessment method . 17
7.6 Repeatability . 18
7.7 Presentation and interpretation of the experimental assessment results . 18
Annex A (informative) Fill factor dependency . 26
Annex B (informative) Display white luminance dependency . 29
Annex C (informative) Pattern generator . 32
Bibliography . 34
Figure 1 – Comparison between the proposed visual assessment and the conventional
physical measurement . 9
Figure 2 – Definition of viewing directions by the spherical angles of θ and φ . 10
Figure 3 – Layout for horizontal viewing direction . 11
Figure 4 – Pattern structures. 12
Figure 5 – Colour assignment of test pattern . 14
Figure 6 – Test environment . 15
Figure 7 – Average CMF according to ethnic origin . 17
Figure 8 – Assessment procedure . 18
Figure 9 – Visual assessment results: statistical plot (upper figure) and mean
recognition rates (lower figure) . 19
Figure 10 – Statistical plot (upper) and mean of colour differences (lower) of test
patterns . 20
Figure 11 – Process of S-CIELAB transformation . 21
Figure 12 – Contrast sensitivity function of HVS. 21
Figure 13 – S-CIELAB results: statistical plot (upper) and mean colour difference
(lower) . 22
Figure 14 – Correlation between physical measures and S-CIELAB results . 23
Figure 15 – Correlation between visual assessment and S-CIELAB method . 23
Figure 16 – Pattern dependency . 24
Figure 17 – Observer dependency . 25
Figure A.1 – Fill factor variation . 26
Figure A.2 – FF dependency . 27
Figure A.3 – Colour difference relationship between pictorial image and test patterns
with various FF . 28
Figure B.1 – Colour reproduction performance of the DUT . 30
Figure B.2 – White luminance dependency . 31
Figure C.1 – Pattern generator user interface . 33
Table 1 – Measurement directions for DUTs in living rooms . 11
Table 2 – Reference colours of test pattern . 13
Table 3 – Test room condition . 15
Table 4 – Experimental setup of the DUT . 16
Table 5 – Correlation coefficients . 24
Table B.1 – Experimental setup and parameters . 29
– 4 – IEC TR 62977-5-2:2021 © IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRONIC DISPLAYS –
Part 5-2: Visual assessment –
Colour discrimination according to viewing direction
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC TR 62977-5-2 has been prepared by IEC technical committee 110: Electronic displays. It
is a Technical Report.
The text of this Technical Report is based on the following documents:
Draft Report on voting
110/1227/DTR 110/1251A/RVDTR
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this Technical Report is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at /members_experts/refdocs. The main document types developed by IE
...