|
IEC TR 62039
Edition 2.0 2021-08
TECHNICAL
REPORT
colour
inside
Selection guidelines for polymeric materials for outdoor use under HV stress
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
.
IEC TR 62039
Edition 2.0 2021-08
TECHNICAL
REPORT
colour
inside
Selection guidelines for polymeric materials for outdoor use under HV stress
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.035.20; 29.080.10 ISBN 978-2-8322-1012-8
– 2 – IEC TR 62039:2021 © IEC:2021
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Important material properties . 9
4.1 General . 9
4.2 Resistance to tracking and erosion . 9
4.3 Arc resistance . 9
4.4 Water diffusion test (resistance of material to chemical and physical
degradation by water) . 10
4.4.1 General . 10
4.4.2 Test specimens . 10
4.4.3 Test procedure . 10
4.4.4 Minimum requirements . 12
4.5 Tear strength . 13
4.6 Volume resistivity . 13
4.7 Breakdown field strength . 13
4.8 Stress corrosion test (resistance to chemical attack) . 13
4.8.1 General . 13
4.8.2 Test specimens . 14
4.8.3 Procedure . 14
4.8.4 Acceptance criteria . 14
4.9 Resistance to weathering and UV procedure . 14
4.10 Resistance to flammability procedure . 15
4.11 Glass transition temperature . 15
4.12 Hydrophobicity . 17
4.12.1 General . 17
4.12.2 Transfer of hydrophobicity . 17
4.12.3 Retention and recovery of hydrophobicity . 21
5 Important properties and minimum requirements of polymeric insulation materials
for outdoor use under HV stress . 22
Annex A (informative) Additional measuring methods . 25
A.1 General . 25
A.2 Resistance to corona and ozone . 25
A.3 Resistance to acid attack generated by partial discharge under wet,
contaminated, and energization condition . 25
Annex B (informative) Water immersion test . 26
B.1 General . 26
B.2 Test procedure . 26
Bibliography . 28
Figure 1 – Example of boiling container for water diffusion test . 11
Figure 2 – Electrodes for voltage test . 12
Figure 3 – Voltage test circuit . 12
Figure 4 – Example of permanent load application for stress corrosion test . 14
Figure 5 – Definition of glass transition temperature T . 16
g
Figure 6 – Specimen with adhesive foil . 18
Figure 7 – Specimen with pollution layer . 19
Figure 8 – Area for the drop application for measurement according to IEC TS 62073
(example for Method A). 21
Figure B.1 – Example of water uptake of two different kinds of materials (MFRP and
UFRP) . 27
Table 1 – Important properties and minimum requirements of polymeric insulation
materials for outdoor use under HV stress . 22
Table B.1 – Example of dielectric properties in dry conditions and after water
immersion for 100 days . 27
– 4 – IEC TR 62039:2021 © IEC:2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SELECTION GUIDELINES FOR POLYMERIC MATERIALS
FOR OUTDOOR USE UNDER HV STRESS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC TR 62039 has been prepared by IEC technical committee 112: Evaluation and qualification
of electrical insulating materials and systems. It is a Technical Report.
This second edition cancels and replaces the first edition published in 2007. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) addition of hydrophobicity definitions and hydrophobicity transfer test;
b) addition of stress corrosion test.
The text of this Technical Report is based on the following documents:
Draft Report on voting
112/526/DTR 112/535/RVDTR
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this Technical Report is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at /members_experts/refdocs. The main document types developed by IEC are
described in greater detail at /standardsdev/publications.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdr
...