ETSI TS 119 422 V1.0.1 (2015-07)

Electronic Signatures and Infrastructures (ESI); Time-stamping protocol and time-stamp profiles

ETSI TS 119 422 V1.0.1 (2015-07)

Name:ETSI TS 119 422 V1.0.1 (2015-07)   Standard name:Electronic Signatures and Infrastructures (ESI); Time-stamping protocol and time-stamp profiles
Standard number:ETSI TS 119 422 V1.0.1 (2015-07)   language:English language
Release Date:30-Jun-2015   technical committee:ESI - Electronic Signatures and Infrastructures
Drafting committee:   ICS number:
ETSI TS 119 422 V1.0.1 (2015-07)






TECHNICAL SPECIFICATION
Electronic Signatures and Infrastructures (ESI);
Time-stamping protocol and time-stamp profiles

---------------------- Page: 1 ----------------------
2 ETSI TS 119 422 V1.0.1 (2015-07)



Reference
RTS/ESI-0019422-TS
Keywords
electronic signature, security, time-stamping,
trust services
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:

Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2015.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 119 422 V1.0.1 (2015-07)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 6
4 Requirements for a time-stamping client . 6
4.1 Profile for the format of the request . 6
4.1.1 Core requirement . 6
4.1.2 Parameters to be supported . 6
4.1.3 Hash algorithms to be used . 6
4.2 Profile for the format of the response . 7
4.2.1 Core requirement . 7
4.2.2 Parameters to be supported . 7
4.2.3 Algorithms to be supported . 7
4.2.4 Key lengths to be supported . 7
5 Requirements for a time-stamping server. 7
5.1 Profile for the format of the request . 7
5.1.1 Core requirement . 7
5.1.2 Parameters to be supported . 7
5.1.3 Algorithms to be supported . 7
5.2 Profile for the format of the response . 7
5.2.1 Core requirement . 7
5.2.2 Parameters to be supported . 8
5.2.3 Algorithms to be used . 8
6 TSU certificate profile . 8
6.1 General requirements . 8
6.2 Subject name requirements. 8
6.3 Key lengths requirements . 8
6.4 Key usage requirements . 8
6.5 Algorithm requirements . 9
7 Profiles for the transport protocols to be supported . 9
8 Object identifiers of the cryptographic algorithms . 9
9 Additional requirements for Regulation (EU) No 910/2014 . 9
9.1 Regulation statement . 9
Annex A (normative): Structure for the policy field . 10
Annex B (normative): ASN.1 declarations. 11
History . 12

ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 119 422 V1.0.1 (2015-07)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Electronic Signatures and
Infrastructures (ESI).
The present document was previously published as ETSI TS 101 861 [i.2].
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The present document is aiming to meet the general requirements of the international community to provide trust and
confidence in electronic transactions including, amongst others, applicable requirements from Regulation (EU)
No 910/2014 [i.3].
Time-stamping is critical for digital signatures in order to know whether the digital signature was affixed during the
validity period of the certificate. One method of assuring the signing time is to affix a time-stamp bound to the signature
as defined in IETF RFC 3161 [1].
IETF RFC 3161 [1] defines a time-stamp protocol and a time-stamp token format. The present document limits the
number of options by placing some additional constraints.
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 119 422 V1.0.1 (2015-07)
1 Scope
The present document defines a profile for the time-stamping protocol and the time-stamp token defined in
IETF RFC 3161 [1] including optional ESSCertIDv2 update in IETF RFC 5816 [2].
It defines what a time-stamping client supports and what a time-stamping server supports.
Time
...

  • Relates Information
  • IEC 60300-3-7:1999

    IEC 60300-3-7:1999 - Dependability management - Part 3-7: Application guide - Reliability stress screening of electronic hardware Released:5/31/1999 Isbn:2831847974
    09-20
  • HD 571 S1:1990

    HD 571 S1:1998
    09-20
  • ISO 8130-4:1992

    ISO 8130-4:1992 - Coating powders
    09-20
  • HD 478.2.7 S1:1990

    HD 478.2.7 S1:2003
    09-19
  • ISO 8473:1988/Cor 1:1992

    ISO 8473:1988/Cor 1:1992 - Information processing systems — Data communications — Protocol for providing the connectionless-mode network service — Technical Corrigendum 1 Released:12/10/1992
    09-19
  • EN ISO 9013:2017/prA1

    EN ISO 9013:2017/oprA1:2024
    09-19
  • IEC 60118-6:1999

    IEC 60118-6:1999 - Hearing aids - Part 6: Characteristics of electrical input circuits for hearing aids Released:6/9/1999 Isbn:2831848075
    09-19
  • HD 280.3 S1:1990

    HD 280.3 S1:1999
    09-19
  • ISO 9832:1992

    ISO 9832:1992 - Animal and vegetable fats and oils -- Determination of residual technical hexane content
    09-19
  • EN 60188:1988/A1:1990

    EN 60188:1999/A1:1999
    09-18