|
TECHNICAL SPECIFICATION
Universal Mobile Telecommunications System (UMTS);
LTE;
5G;
User Equipment (UE) conformance specification
for UE positioning;
Part 1: Conformance test specification
(3GPP TS 37.571-1 version 16.7.0 Release 16)
---------------------- Page: 1 ----------------------
3GPP TS 37.571-1 version 16.7.0 Release 16 1 ETSI TS 137 571-1 V16.7.0 (2021-01)
Reference
RTS/TSGR-0537571-1vg70
Keywords
5G,LTE,UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
If you find errors in the present document, please send your comment to one of the following services:
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3GPP TS 37.571-1 version 16.7.0 Release 16 2 ETSI TS 137 571-1 V16.7.0 (2021-01)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Legal Notice
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities. These shall be
interpreted as being references to the corresponding ETSI deliverables.
The cross reference between 3GPP and ETSI identities can be found under .
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 3 ----------------------
3GPP TS 37.571-1 version 16.7.0 Release 16 3 ETSI TS 137 571-1 V16.7.0 (2021-01)
Contents
Intellectual Property Rights . 2
Legal Notice . 2
Modal verbs terminology . 2
Foreword . 30
Introduction . 30
1 Scope . 31
2 References . 31
3 Definitions, symbols and abbreviations . 33
3.1 Definitions . 33
3.2 Symbols . 34
3.3 Abbreviations . 34
4 General test conditions . 36
4.1 Introduction . 36
4.2 GNSS test conditions. 36
4.2.0 General . 36
4.2.1 GNSS signals . 36
4.2.2 GNSS frequency . 36
4.2.3 GNSS static propagation conditions . 36
4.2.4 GNSS multi-path conditions . 36
4.2.5 UEs supporting multiple satellite signals . 37
4.2.6 GNSS multi System Time Offsets . 38
4.3 UTRA test conditions . 38
4.3.1 UTRA frequency band and frequency range . 38
4.3.2 UTRA frequency . 38
4.3.3 Sensors . 38
4.4 E-UTRA test conditions . 38
4.4.1 E-UTRA frequency band and frequency range . 38
4.4.2 Groups of bands . 39
4.4.3 Sensors . 39
4.5 A-GNSS test conditions . 39
4.5.1 General . 39
4.5.2 UTRAN measurement parameters . 39
4.5.2.1 UE based A-GNSS measurement parameters . 39
4.5.2.2 UE assisted A-GNSS measurement parameters . 39
4.5.2.3 2D position error . 39
4.5.2.4 Response time . 40
4.5.3 E-UTRAN and NR measurement parameters . 40
4.5.3.1 UE based A-GNSS measurement parameters . 40
4.5.3.2 UE assisted A-GNSS measurement parameters . 40
4.5.3.3 2D Error definition . 40
4.5.3.4 Response time . 40
4.5.4 Converting A-GNSS UE-assisted measurement reports into position estimates . 40
4.6 ECID test conditions . 41
4.6.1 Simulated cells . 41
4.6.2 Propagation conditions . 41
4.6.2.1 Static . 41
4.6.2.2 Multi-path fading . 41
4.6.3 UE Rx - Tx time difference reporting range . 41
4.7 OTDOA test conditions . 42
4.7.1 Simulated cells . 42
4.7.2 Propagation conditions . 43
4.7.2.1 Static . 43
4.7.2.2 Multi-path fading . 43
ETSI
---------------------- Page: 4 ----------------------
3GPP TS 37.571-1 version 16.7.0 Release 16 4 ETSI TS 137 571-1 V16.7.0 (2021-01)
4.7.3 Response time . 43
4.7.4 RSTD reporting range . 43
4.7.5 RSTD Carrier Aggregation Test Cases with Different Channel Bandwidth Combinations . 44
4.8 MBS test conditions . 44
4.8.1 MBS signals . 44
4.8.2 Propagation conditions . 44
4.8.2.1 Static . 44
4.8.2.2 Multi-path fading . 44
4.8.3 Response time . 44
4.9 WLAN test conditions . 44
4.9.1 Simulated WLAN Access Points . 44
4.9.2 Propagation conditions . 45
4.9.2.1 Static . 45
4.9.3 Response time . 45
4.9.4 Void . 45
4.10 BLE test conditions . 45
4.10.1 Simulated BLE . 45
4.10.2 Propagation conditions . 45
4.10.2.1 Static . 45
4.10.3 Response time . 45
4.11 NB-IOT test conditions . 45
4.11.1 Groups of bands . 45
4.11.2 NB-IOT inband mode . 46
4.12 NR test conditions . 46
4.12.1 NR terminology . 46
4.12.2 NR frequency band and frequency range . 46
4.12.3 Groups of bands . 46
4.12.4 Sensors . 46
4.12.5 Default signal conditions for FR2 . 47
4A Support of 4 Rx capable UEs . 47
4A.0 Introduction . 47
4A.1 RAT Independent Tests . 47
4A.2 RAT Dependent Tests . 47
4A.2.1 Principle of testing . 47
4A.2.1.1 Single carrier tests . 47
4A.2.1.2 Carrier Aggregation tests . 47
4A.2.1.3 Antenna connection for bands where 2RX is supported . 47
4A.2.1.4 Antenna connection for bands where 4RX is supported . 48
4B Applicability of tests for types and Categories of UE . 48
4B.1 Introduction . 48
4B.2 Applicability of requirements and tests . 48
5 UTRA A-GPS Minimum Performance requirements . 50
5.1 General . 50
5.2 Sensitivity . 50
5.2.1 Sensitivity Coarse Time Assistance . 50
5.2.1.1 Definition and applicability . 50
5.2.1.2 Minimum requirements . 50
5.2.1.3 Test purpose . 50
5.2.1.4 Method of test . 51
5.2.1.4.1 Initial conditions . 51
5.2.1.4.2 Procedure . 51
5.2.1.5 Test Requirements . 51
5.2.2 Sensitivity Fine Time Assistance . 52
5.2.2.1 Definition and applicability . 52
5.2.2.2 Minimum requirements . 52
5.2.2.3 Test purpose . 53
5.2.2.4 Method of test . 53
5.2.2.4.1 Initial conditions . 53
5.2.2.4.2 Procedure . 53
5.2.2.5 Test Requirements . 53
ETSI
---------------------- Page: 5 ----------------------
3GPP TS 37.571-1 version 16.7.0 Release 16 5 ETSI TS 137 571-1 V16.7.0 (2021-01)
5.3 Nominal Accuracy . 54
5.3.1 Definition and applicability . 54
5.3.2 Minimum requirements . 54
5.3.3 Test purpose . 54
5.3.4 Method of test . 55
5.3.4.1 Initial conditions . 55
5.3.4.2 Procedure . 55
5.3.5 Test Requirements . 56
5.4 Dynamic Range . 56
5.4.1 Definition and applicability . 56
5.4.2 Minimum requirements . 56
5.4.3 Test purpose . 57
5.4.4 Method of test . 57
5.4.4.1 Initial conditions . 57
5.4.4.2 Procedure . 57
5.4.5 Test Requirements . 58
5.5 Multi-path Performance . 58
5.5.1 Definition and applicability . 58
5.5.2 Minimum requirements . 58
5.5.3 Test purpose . 59
5.5.4 Method of test . 59
5.5.4.1 Initial conditions . 59
5.5.4.2 Procedure . 59
5.5.5 Test Requirements . 60
5.6 Moving Scenario and Periodic Update Performance . 60
5.6.1 Definition and applicability . 60
5.6.2 Minimum requirements . 60
5.6.3 Test purpose . 61
5.6.4 Method of test . 61
5.6.4.1 Initial conditions . 61
5.6.4.2 Procedure . 62
5.6.5 Test Requirements . 63
6 UTRA A-GNSS Minimum Performance requirements . 64
6.1 General . 64
6.2 Sensitivity . 64
6.2.1 Sensitivity Coarse Time Assistance . 64
6.2.1.1 Definition and applicability . 64
6.2.1.2 Minimum requirements . 64
6.2.1.3 Test purpose . 65
6.2.1.4 Method of test . 65
6.2.1.4.1 Initial conditions .
...