|
SLOVENSKI STANDARD
01-december-2022
Nadomešča:
SIST EN 15947-4:2016
Pirotehnični izdelki - Ognjemetni izdelki, kategorije F1, F2 in F3 - 4. del: Preskusne
metode
Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods
Pyrotechnische Gegenstände - Feuerwerkskörper, Kategorien F1, F2 und F3 - Teil 4:
Prüfverfahren
Articles pyrotechniques - Artifices de divertissement, Catégories F1, F2 et F3 - Partie 4:
Méthodes d'essai
Ta slovenski standard je istoveten z: EN 15947-4:2022
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 15947-4
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2022
EUROPÄISCHE NORM
ICS 71.100.30 Supersedes EN 15947-4:2015
English Version
Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 -
Part 4: Test methods
Articles pyrotechniques - Artifices de divertissement, Pyrotechnische Gegenstände - Feuerwerkskörper,
Catégories F1, F2 et F3 - Partie 4 : Méthodes d'essai Kategorien F1, F2 und F3 - Teil 4: Prüfverfahren
This European Standard was approved by CEN on 8 August 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15947-4:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Test environment . 6
4.1 General. 6
4.2 Indoor . 6
4.3 Outdoor. 7
4.3.1 General. 7
4.3.2 Category F1. 7
4.3.3 Category F2. 7
4.3.4 Category F3. 7
4.4 Monitoring height . 7
5 Apparatus . 7
6 Methods of tests . 12
6.1 Construction and stability . 12
6.1.1 Length of handle . 12
6.1.2 Attachment of separate handle or separate base . 13
6.1.3 Length of item. 13
6.1.4 Length of pull-string or pull-strip . 14
6.1.5 Determination of diameter . 14
6.1.6 Attachment of initial fuse . 14
6.1.7 Resistance to ignition by an abrasive surface . 14
6.1.8 Breakability of end closures . 15
6.2 Design – Verification . 15
6.2.1 General. 15
6.2.2 Conformity to drawings and part lists . 15
6.2.3 Determination of net explosive content . 16
6.3 Paper tests . 17
6.3.1 Test for burning or incandescent matter . 17
6.3.2 Test for horizontally projected debris . 18
6.3.3 Test for vertically projected debris . 20
6.4 Angle of ascent and height of explosion. 21
6.4.1 Apparatus . 21
6.4.2 Procedure for double banger . 22
6.4.3 Procedure for items other than double banger . 22
6.5 Measurement of sound pressure level . 22
6.5.1 General measurement for outdoors. 22
6.5.2 Party popper . 23
6.5.3 Christmas cracker and snap for indoors . 24
6.6 Time measurement . 25
6.6.1 Apparatus . 25
6.6.2 Procedure . 25
6.7 Measuring of labelling . 25
6.7.1 Apparatus . 25
6.7.2 Procedure . 25
6.8 Extinguishing of flames . 26
6.8.1 Apparatus . 26
6.8.2 Procedure . 26
6.9 Burning rate of composition . 26
6.9.1 Apparatus . 26
6.9.2 Procedure . 26
6.10 Droop test . 26
6.10.1 Apparatus . 26
6.10.2 Procedure . 26
6.11 Projected debris (outdoor) . 26
6.11.1 Apparatus . 26
6.11.2 Procedure . 26
6.12 Incandescent matter . 27
6.13 Visual and audible examinations . 27
6.14 Mechanical conditioning . 27
6.14.1 Apparatus . 27
6.14.2 Procedure . 27
6.15 Thermal conditioning . 28
6.15.1 Apparatus . 28
6.15.2 Procedure . 28
6.16 Striking surface test . 28
6.16.1 Apparatus . 28
6.16.2 Procedure . 28
6.17 Function test . 28
6.17.1 Apparatus . 28
6.17.2 Procedure . 28
6.18 Determination of tube angle .
...