|
SLOVENSKI STANDARD
01-januar-2023
Nadomešča:
SIST EN ISO 13137:2014
Zrak na delovnem mestu - Črpalke za osebno vzorčenje kemičnih in bioloških
agensov - Zahteve in preskusne metode (ISO 13137:2022)
Workplace atmospheres - Pumps for personal sampling of chemical and biological
agents - Requirements and test methods (ISO 13137:2022)
Arbeitsplatzatmosphäre - Pumpen für die personengetragene Probenahme von
chemischen und biologischen Arbeitsstoffen - Anforderungen und Prüfverfahren (ISO
13137:2022)
Air des lieux de travail - Pompes pour le prélèvement individuel des agents chimiques et
biologiques - Exigences et méthodes d'essai (ISO 13137:2022)
Ta slovenski standard je istoveten z: EN ISO 13137:2022
ICS:
13.040.30 Kakovost zraka na delovnem Workplace atmospheres
mestu
23.080 Črpalke Pumps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 13137
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2022
EUROPÄISCHE NORM
ICS 13.040.30 Supersedes EN ISO 13137:2013
English Version
Workplace atmospheres - Pumps for personal sampling of
chemical and biological agents - Requirements and test
methods (ISO 13137:2022)
Air des lieux de travail - Pompes pour le prélèvement Arbeitsplatzatmosphäre - Pumpen für die
individuel des agents chimiques et biologiques - personenbezogene Probenahme von chemischen und
Exigences et méthodes d'essai (ISO 13137:2022) biologischen Arbeitsstoffen - Anforderungen und
Prüfverfahren (ISO 13137:2022)
This European Standard was approved by CEN on 2 September 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13137:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 13137:2022) has been prepared by Technical Committee ISO/TC 146 "Air
quality" in collaboration with Technical Committee CEN/TC 137 “Assessment of workplace exposure to
chemical and biological agents” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2023, and conflicting national standards shall be
withdrawn at the latest by April 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13137:2013.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 13137:2022 has been approved by CEN as EN ISO 13137:2022 without any modification.
INTERNATIONAL ISO
STANDARD 13137
Second edition
2022-08
Workplace atmospheres — Pumps for
personal sampling of chemical and
biological agents — Requirements and
test methods
Air des lieux de travail — Pompes pour le prélèvement individuel des
agents chimiques et biologiques — Exigences et méthodes d'essai
Reference number
ISO 13137:2022(E)
ISO 13137:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii
ISO 13137:2022(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Type of pump . 2
5 Requirements . 2
5.1 Features . 2
5.2 Mass . 2
5.3 Design safety . 2
5.4 Operating time . 2
5.5 Start-up and long-term performance . 3
5.6 Short-term interruption of air flow . 3
5.7 Temperature dependence . 3
5.8 Mechanical strength . 3
5.9 Pulsation of flow rate (for type P pumps only) . 4
5.10 Flow rate stability under increasing pressure drop . 4
−1
5.10.1 Pumps with a nominal flow rate range less or equal than 5 000 ml · min . 4
−1
5.10.2 Pumps with a nominal flow rate range above 5 000 ml · min . 5
5.11 Timer accuracy . 5
5.12 Electromagnetic compatibility. 5
5.13 Explosion hazard . 5
6 Test conditions .5
6.1 Number of test objects . 5
6.2 Test instruments . 5
6.3 Preconditioning and sequence of tests . 6
6.4 Adjustment of volumetric flow rate and pressure drop . 6
6.5 Test set-up and performance . 6
7 Test methods . 7
7.1 General . 7
7.2 Features . 7
7.3 Mass . 7
7.4 Design safety . 8
7.5 Operating time . 8
7.6 Start-up and long-term performance . 8
7.6.1 Test set-up . 8
7.6.2 Flow rate and pressure drop adjustment . 8
7.6.3 Procedure . 8
7.7 Short-term interruption of air flow . 9
7.7.1 Test set-up . 9
7.7.2 Flow rate and pressure drop adjustment . 9
7.7.3 Procedure . 9
7.8 Temperature dependence . 9
7.8.1 Test set-up .
...