|
SIST EN 16436-1:2014/kFprA1:2015
01-september-2015
*XPHQLLQSODVWLþQLSULNOMXþNLFHYRYRGLLQFHYL]DSURSDQEXWDQLQQMXQH]PHVLY
SOLQDVWHPVWDQMXGHO &HYLLQFHYRYRGL
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and
their mixture in the vapour phase - Part 1: Hoses and tubings
Gummi- und Kunststoff-Schläuche und -Schlauchleitungen mit und ohne Einlage zur
Verwendung mit Propan, Butan und deren Gemischen in der Gasphase - Teil 1:
Schäuche mit und ohne Einlage
Tuyaux, tubes et flexibles en caoutchouc et en plastique pour utilisation avec le propane,
le butane et leurs mélanges en phase vapeur - Partie 1: Tuyaux et tubes
Ta slovenski standard je istoveten z: EN 16436-1:2014/FprA1:2015
ICS:
83.140.40 Gumene cevi Hoses
SIST EN 16436-1:2014/kFprA1:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 16436-1:2014/kFprA1:2015
---------------------- Page: 2 ----------------------
SIST EN 16436-1:2014/kFprA1:2015
EUROPEAN STANDARD
FINAL DRAFT
EN 16436-1:2014
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
May 2015
ICS 23.040.70
English Version
Rubber and plastics hoses, tubing and assemblies for use with
propane and butane and their mixture in the vapour phase - Part
1: Hoses and tubings
Tuyaux, tubes et flexibles en caoutchouc et en plastique Gummi- und Kunststoff-Schläuche und -Schlauchleitungen
pour utilisation avec le propane, le butane et leurs mit und ohne Einlage zur Verwendung mit Propan, Butan
mélanges en phase vapeur - Partie 1: Tuyaux et tubes und deren Gemischen in der Gasphase - Teil 1: Schäuche
mit und ohne Einlage
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 181.
This draft amendment A1, if approved, will modify the European Standard EN 16436-1:2014. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain
...