|
SLOVENSKI STANDARD
01-januar-2023
Preskusna metoda za ocenjevanje zmogljivosti sredstev in naprav za čiščenje
plinske faze za splošno prezračevanje - 3. del: Sistem klasifikacije za GPACD, ki se
uporablja za obdelavo zraka na prostem (ISO 10121-3:2022)
Test methods for assessing the performance of gas-phase air cleaning media and
devices for general ventilation - Part 3: Classification system for GPACDs applied to
treatment of outdoor air (ISO 10121-3:2022)
Methode zur Leistungsermittlung von Medien und Vorrichtungen zur Reinigung der
Gasphase für die allgemeine Lüftung - Teil 3: Klassifizierungssystem für die Behandlung
von Außenluft (ISO 10121-3:2022)
Méthodes d’essai pour l’évaluation de la performance des médias et des dispositifs de
filtration moléculaire pour la ventilation générale - Partie 3: Système de classification
pour les GPACD appliqués au traitement de l’air extérieur (ISO 10121-3:2022)
Ta slovenski standard je istoveten z: EN ISO 10121-3:2022
ICS:
91.140.30 Prezračevalni in klimatski Ventilation and air-
sistemi conditioning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 10121-3
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2022
EUROPÄISCHE NORM
ICS 91.140.30
English Version
Test methods for assessing the performance of gas-phase
air cleaning media and devices for general ventilation -
Part 3: Classification system for GPACDs applied to
treatment of outdoor air (ISO 10121-3:2022)
Méthodes d'essai pour l'évaluation de la performance Methode zur Leistungsermittlung von Medien und
des médias et des dispositifs de filtration moléculaire Vorrichtungen zur Reinigung der Gasphase für die
pour la ventilation générale - Partie 3: Système de allgemeine Lüftung - Teil 3: Klassifizierungssystem für
classification pour les GPACD appliqués au traitement die Behandlung von Außenluft (ISO 10121-3:2022)
de l'air extérieur (ISO 10121-3:2022)
This European Standard was approved by CEN on 25 September 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10121-3:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 10121-3:2022) has been prepared by Technical Committee ISO/TC 142
"Cleaning equipment for air and other gases" in collaboration with Technical Committee CEN/TC 195
“Cleaning equipment for air and other gases” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2023, and conflicting national standards shall be
withdrawn at the latest by April 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 10121-3:2022 has been approved by CEN as EN ISO 10121-3:2022 without any
modification.
INTERNATIONAL ISO
STANDARD 10121-3
First edition
2022-10
Test methods for assessing the
performance of gas-phase air cleaning
media and devices for general
ventilation —
Part 3:
Classification system for GPACDs
applied to treatment of outdoor air
Méthodes d’essai pour l’évaluation de la performance des médias
et des dispositifs de filtration moléculaire pour la ventilation
générale —
Partie 3: Système de classification pour les GPACD appliqués au
traitement de l’air extérieur
Reference number
ISO 10121-3:2022(E)
ISO 10121-3:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii
ISO 10121-3:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms.6
5 Classification system for outdoor air . 6
5.1 General . 6
5.2 Test setup and test parameters . 7
5.3 Initial removal efficiency . 8
5.4 Dose concept . 8
5.5 Classes, duty levels and dose . 8
5.6 Pollutants and concentrations . 9
5.7 Integrated removal efficiency . 9
5.8 Classification example graph . 10
5.9 Desorption and retentivity . 11
6 Classification test sequence .11
6.1 General . 11
6.2 Conditioning. 11
6.3 Initial removal efficiency .12
6.4 Capacity determination expressed as E (%) versus D (g/m ) .12
c N
6.4.1 Zero to LD . 12
6.4.2 Check E at LD .12
c
6.4.3 LD to MD . 12
6.4.4 MD to HD and HD .12
6.5 Retentivity . 13
6.6 Premature stop . 13
7 Classification system .13
7.1 General .13
7.2 LD, MD and HD dose values . 13
7.3 Classification example . 14
8 Report .15
8.1 General . 15
8.2 Test report layout . 15
Annex A (informative) Information about environment pollutant concentration in outdoor
air .22
Bibliography .24
iii
ISO 10121-3:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally
...