|
SLOVENSKI STANDARD
01-februar-2023
Dobra praksa za izdelavo/vrednotenje analize prstnih odtisov v skladu s skupino
standardov ISO 28199 (ISO/TR 11594:2022)
Best practices for the creation/evaluation of fingerprint analysis in accordance with the
ISO 28199 series (ISO/TR 11594:2022)
Bewährte Verfahren für die Erstellung/Auswertung von Fingerabdruckanalysen nach der
Normenreihe ISO 28199 (ISO/TR 11594:2022)
Bonnes pratiques pour la création/l'évaluation de l'analyse des empreintes digitales
conformément à la série ISO 28199 (ISO/TR 11594:2022)
Ta slovenski standard je istoveten z: CEN ISO/TR 11594:2022
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
CEN ISO/TR 11594
TECHNICAL REPORT
RAPPORT TECHNIQUE
November 2022
TECHNISCHER REPORT
ICS 87.040
English Version
Best practices for the creation/evaluation of fingerprint
analysis in accordance with the ISO 28199 series (ISO/TR
11594:2022)
Bonnes pratiques pour la création/l'évaluation de Bewährte Verfahren für die Erstellung/Auswertung
l'analyse des empreintes digitales conformément à la von Fingerabdruckanalysen nach der Normenreihe ISO
série ISO 28199 (ISO/TR 11594:2022) 28199 (ISO/TR 11594:2022)
This Technical Report was approved by CEN on 21 November 2022. It has been drawn up by the Technical Committee CEN/TC
139.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 11594:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
The text of ISO/TR 11594:2022 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over as
which is held by DIN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
Endorsement notice
The text of ISO/TR 11594:2022 has been approved by CEN as CEN ISO/TR 11594:2022 without any
modification.
TECHNICAL ISO/TR
REPORT 11594
First edition
2022-05
Best practices for the creation/
evaluation of fingerprint analysis in
accordance with the ISO 28199 series
Bonnes pratiques pour la création/l'évaluation de l'analyse des
empreintes digitales conformément à la série ISO 28199
Reference number
ISO/TR 11594:2022(E)
ISO/TR 11594:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii
ISO/TR 11594:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Review of previous developments . .1
5 General quality requirements for the creation of a standard test panel .2
6 Current evaluation methods . 3
7 Selected examples for the graphical presentation of measured quantities from
various measuring tables . 3
8 Test panels .5
9 Materials for FAS panels . 5
10 Wedge layers . 6
11 Possible methods for creating wedge layers . 7
11.1 Through dynamic path distance. 7
11.2 Through dynamic changing of the quantity of paint (paint flow quantity) . 8
11.3 Through dynamic changing of the tip velocity . 9
12 Further information on wedge-shaped coating .11
13 Measuring tables.12
14 Current state-of-the-art technology for measuring devices .14
14.1 Film thickness measuring devices . 14
14.2 Colour-measurement devices . 15
14.3 Measuring devices for determining surface structure . 15
14.4 Measuring devices for determining mottling . 15
15 Monitoring of test equipment.15
16 Software .16
17 Visual evaluation of test panels .17
17.1 General . 17
17.2 Illumination chamber for the visual assessment of standard X-Y measuring table
panels, taking into account the specifications in ISO 3668 . 17
17.2.1 Aim . 17
17.2.2 Dimensions (example) . 18
17.3 Possible items of equipment (illumination in accordance with ISO 3668) . 18
17.3.1 Fluorescent tubes . 18
17.3.2 Yellow halogen lamp and daylight lamps. 19
17.4 Process steps . 21
18 Result from interlaboratory testing to demonstrate precision .22
Bibliography .25
iii
ISO/TR 11594:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee
SC 9, General test methods for paints and varnishes.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
TECHNICAL REPORT ISO/TR 11594:2022(E)
Best practices for the creation/evaluation of fingerprint
analysis in accordance with the ISO 28199 series
1 Scope
This document gives technical descriptions of X-Y measuring tables together with sample applications,
sample evaluations and practical recommendations for visual and metrological evaluation as a
supplement to the ISO 28199 series. This document intends to provide further information on this
subject to interested parties.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: availa
...