EN 16510-2-6:2022

Residential solid fuel burning appliances - Part 2-6: Mechanically by wood pellets fed roomheaters, inset appliances and cookers

EN 16510-2-6:2022

Name:EN 16510-2-6:2022   Standard name:Residential solid fuel burning appliances - Part 2-6: Mechanically by wood pellets fed roomheaters, inset appliances and cookers
Standard number:EN 16510-2-6:2022   language:English language
Release Date:20-Dec-2022   technical committee:CEN/TC 295 - Residential solid fuel burning appliances
Drafting committee:CEN/TC 295/WG 2 - Roomheaters   ICS number:97.100.30 - Solid fuel heaters

SLOVENSKI STANDARD
01-marec-2023
Nadomešča:
SIST EN 13240:2003
SIST EN 13240:2003/A2:2005
SIST EN 13240:2003/A2:2005/AC:2008
SIST EN 13240:2003/AC:2006
SIST EN 14785:2006
Grelne naprave na trdna goriva za stanovanjske stavbe - 2-6. del: Grelniki
prostorov, kaminski vložki in štedilniki z mehanskim dodajanjem lesnih peletov
Residential solid fuel burning appliances - Part 2-6: Mechanically by wood pellets fed
roomheaters, inset appliances and cookers
Häusliche Feuerstätten für feste Brennstoffe - Teil 2-6: Mechanisch mit Holzpellets
beschickte Raumheizer, Einsätze und Herde
Équipement de chauffage domestique - Partie 2-6 : Poêles, inserts et cuisinières à
granulés de bois et à alimentation mécanique
Ta slovenski standard je istoveten z: EN 16510-2-6:2022
ICS:
97.100.30 Grelniki na trdo gorivo Solid fuel heaters
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 16510-2-6
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2022
EUROPÄISCHE NORM
ICS 97.100.30 Supersedes EN 14785:2006
English Version
Residential solid fuel burning appliances - Part 2-6:
Mechanically by wood pellets fed roomheaters, inset
appliances and cookers
Appareils de chauffage domestiques à combustible Häusliche Feuerstätten für feste Brennstoffe - Teil 2-6:
solide - Partie 2-6 : Poêles, inserts et cuisinières à Mechanisch mit Holzpellets beschickte Raumheizer,
granulés de bois et à alimentation mécanique Einsätze und Herde
This European Standard was approved by CEN on 23 October 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16510-2-6:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Characteristics . 8
4.1 Load bearing capacity . 8
4.2 Protection of combustible materials . 8
4.3 Carbon monoxide emission (CO) . 9
4.4 Nitrogen oxides (NO ) emissions . 9
x
4.5 Emission of organic gaseous compounds (OGC) emissions . 9
4.6 Particulate matter (PM) emissions . 10
4.7 Safety and accessibility in use . 10
4.7.1 General . 10
4.7.2 Flue gas outlet temperature at nominal heat output . 10
4.7.3 Flue gas outlet temperature at part load heat output. 10
4.7.4 Minimum flue draught at nominal heat output . 11
4.7.5 Minimum flue draught at part load heat output . 11
4.7.6 Flue gas mass flow at nominal heat output . 11
4.7.7 Flue gas mass flow at part load heat output . 11
4.7.8 Fire safety of installation to the chimney . 11
4.8 Energy economy and heat retention . 12
4.8.1 Space heat output at nominal heat output . 12
4.8.2 Water heat output, if existing at nominal heat output. 12
4.8.3 Efficiency at nominal heat output . 12
4.8.4 Space heat output at part load heat output . 12
4.8.5 Water heat output, if existing at part load heat output . 13
4.8.6 Efficiency at part load heat output . 13
4.8.7 Seasonal space heating efficiency at appliance’s nominal heat output . 13
4.8.8 Energy efficiency . 13
4.8.9 Electric power consumption at nominal heat output, if existing . 14
4.8.10 Electric power consumption at part load heat output, if existing . 14
4.8.11 Standby mode power consumption, if existing . 14
4.9 Environmental sustainability . 14
5 Descriptive features . 15
5.1 Data for potential use with room ventilation systems: type of appliance (in relation
to its tightness to the room) . 15
5.1.1 General . 15
5.1.2 Tightness related to CO-emission . 17
5.1.3 Overall tightness . 17
5.2 Data for the building's statics: appliance's mass . 17
5.3 Materials and construction elements . 18
5.3.1 General . 18
5.3.2 General stresses . 18
5.3.3 Integral boiler or heat exchanger . 18
5.4 Risk of burning fuel falling out . 18
5.5 Temperature rise in the fuel storage . 18
5.5.1 Temperature rise in the fuel hopper . 18
5.5.2 Safety against back burning through the fuel conveyor system . 18
5.6 Temperature rise of the operating components . 18
5.7 Spillage of flue gases into the room. 19
5.7.1 Possible spillage of CO, if relevant for the fuel type . 19
5.7.2 Safety test for spillage of combustion gas and discharge of embers . 19
5.7.3 Open operation . 19
5.8 Cleanability . 19
5.8.1 Heating surfaces . 19
5.8.2 Flueways . 19
5.8.3 Ashpan . 19
5.8.4 Bottomgrate . 19
5.8.5 Damper . 19
5.8.6 Fan-cut-out-device . 20
5.9 Strength and leak tightness of boiler shells . 20
6 Assessment and verification of constancy of performance - AVCP . 20
6.1 General . 20
6.2 Assessment of performance . 20
6.2.1 General . 20
6.2.2 Test samples, testing and compliance criteria . 21
6.3 Verification of constancy of performance . 22
6.3.1 Factory production control (FPC) . 22
Annex A (normative) Test methods . 27
Annex FA (normative) Measurement positions for conveyor systems . 34
Annex ZA (informative) Relationship of this European Standard with Regulation (EU) No.
305/2011 . 38
ZA.1 Scope and relevant characteristics . 38
ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) . 41
ZA.3 Assignment of AVCP tasks . 42

European foreword
This document (EN 16510-2-6:2022) has been prepared by Technical Committee CEN/TC 295
“Residential solid fuel burning appliances”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2023,
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27