FprEN 16250-1

Levels of performance and acceptance for street cleaning and municipal waste management services - Part 1: General requirements

FprEN 16250-1

Name:FprEN 16250-1   Standard name:Levels of performance and acceptance for street cleaning and municipal waste management services - Part 1: General requirements
Standard number:FprEN 16250-1   language:English language
Release Date:12-Jan-2014   technical committee:CEN/TC 183 - Waste management
Drafting committee:CEN/TC 183/WG 1 - Waste containers   ICS number:03.080.01 - Services in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Festlegung von Kriterien zur Leistungsbewertung von Dienstleistungen in der Straßenreinigung und Abfall- und Wertstofflogistik - Teil 1: Allgemeine AnforderungenNiveaux de performance et d'acceptation pour les services de gestion des déchets municipaux et de nettoiement des chaussées - Partie 1: Exigences généralesLevels of performance and acceptance for street cleaning and municipal waste management services - Part 1: General requirements13.030.40Naprave in oprema za odstranjevanje in obdelavo odpadkovInstallations and equipment for waste disposal and treatment03.080.01Storitve na splošnoServices in generalICS:Ta slovenski standard je istoveten z:FprEN 16250-1kSIST FprEN 16250-1:2014en,fr,de01-november-2014kSIST FprEN 16250-1:2014SLOVENSKI
STANDARD



kSIST FprEN 16250-1:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 16250-1
August 2014 ICS 03.080.01; 13.030.40 English Version
Levels of performance and acceptance for street cleaning and municipal waste management services - Part 1: General requirements
Niveaux de performance et d'acceptation pour les services de gestion des déchets municipaux et de nettoiement des chaussées - Partie 1: Exigences générales
Festlegung von Kriterien zur Leistungsbewertung von Dienstleistungen in der Straßenreinigung und Abfall- und Wertstofflogistik - Teil 1: Allgemeine Anforderungen This draft European Standard is submitted to CEN members for second unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 183.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 16250-1:2014 EkSIST FprEN 16250-1:2014



FprEN 16250-1:2014 (E) 2 Contents Page
Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Compulsory requirements .7 4.1 Compulsory requirements for service providers .7 4.2 Compulsory requirements for man power management .8 4.3 Compulsory requirements of insurances .9 4.4 General requirements for the service provider and its eventual subcontractors .9 5 Recommended requirements . 10 5.1 General . 10 5.2 Quality and environmental management systems .
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27