|
oSIST prEN 13138-4:2018
01-april-2018
3ODYDMRþLSULSRPRþNL]DXþHQMHSODYDQMDGHO/DVWQRVWL]DKWHYHLQSRVWRSNL
SUHVNXãDQMDYYRGL]DSULSRPRþNHUD]UHGD%
Buoyant aids for swimming instruction - Part 4: In water performance, requirements and
test procedures for Class B swimming devices
Auftriebshilfen für das Schwimmenlernen - Teil 4: Wassertechnische Anforderungen und
Prüfungen für Produkte der Klasse B
Aides à la flottabilité pour l'apprentissage de la natation - Partie 4: Performances dans
l'eau, éxigences et méthodes d'essai pour classe B de portées au corps
Ta slovenski standard je istoveten z: prEN 13138-4
ICS:
13.340.70 5HãLOQLMRSLþLY]JRQVND Lifejackets, buoyancy aids
SRPDJDODLQSODYDMRþL and floating devices
SULSRPRþNL
97.220.40 Oprema za športe na Outdoor and water sports
prostem in vodne športe equipment
oSIST prEN 13138-4:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13138-4:2018
---------------------- Page: 2 ----------------------
oSIST prEN 13138-4:2018
DRAFT
EUROPEAN STANDARD
prEN 13138-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2018
ICS 13.340.70; 97.220.40
English Version
Buoyant aids for swimming instruction - Part 4: In water
performance, requirements and test procedures for Class
B swimming devices
Aides à la flottabilité pour l'apprentissage de la Auftriebshilfen für das Schwimmenlernen - Teil 4:
natation - Partie 4: Performances dans l'eau, éxigences Wassertechnische Anforderungen und Prüfungen für
et méthodes d'essai pour classe B de portées au corps Produkte der Klasse B
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 162.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13138-4:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13138-4:2018
prEN 13138-4:2018 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Safety and performance requirements . 7
5 Testing . 9
Annex A (normative) Dimensions of test manikins I to III . 11
A.1 Dimensions of manikins I…III
...