FprEN 16809-1

Thermal insulation products for buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1: Specification for the bonded and loose filled products before installation

FprEN 16809-1

Name:FprEN 16809-1   Standard name:Thermal insulation products for buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1: Specification for the bonded and loose filled products before installation
Standard number:FprEN 16809-1   language:English language
Release Date:28-Aug-2016   technical committee:CEN/TC 88 - Thermal insulating materials and products
Drafting committee:CEN/TC 88/WG 15 - In situ formed insulation products   ICS number:91.100.60 - Thermal and sound insulating materials
SLOVENSKI STANDARD
oSIST prEN 16809-1:2015
01-marec-2015
Toplotnoizolacijski proizvodi za stavbe - Proizvodi, izdelani na mestu vgradnje iz
nasutih nevezanih in vezanih kroglic iz ekspandiranega polistirena (EPS) - 1. del:
Specifikacija za nevezane in vezane nasute proizvode pred vgradnjo
Thermal insulation products for buildings - In-situ formed products from loose-fill
expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 1:
Specification for the bonded and loose filled products before installation
Wärmedämmstoffe für Gebäude - An der Verwendungsstelle hergestellte Produkte aus
losen expandierten Polystyrolkugeln (EPS) und gebundenen Polystyrolkugeln - Teil 1:
Spezifikation für gebundene und lose Schütt- und Einblasdämmstoffe vor dem Einbau
Produits isolants thermiques destinés aux bâtiments - Produits formés sur place à partir
de billes en polystyrène expansé (PSE) en vrac et de billes en polystyrène expansé liées
- Partie 1: Spécification pour les produits liés et en vrac avant mise en œuvre
Ta slovenski standard je istoveten z: prEN 16809-1
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
oSIST prEN 16809-1:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16809-1:2015

---------------------- Page: 2 ----------------------
oSIST prEN 16809-1:2015

EUROPEAN STANDARD
DRAFT
prEN 16809-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2014
ICS 91.100.60
English Version
Thermal insulation products for buildings - In-situ formed
products from loose-fill expanded polystyrene (EPS) beads and
bonded expanded polystyrene beads - Part 1: Specification for
the bonded and loose filled products before installation
Produits isolants thermiques destinés aux bâtiments - Wärmedämmstoffe für Gebäude - An der
Produits formés sur place à partir de billes en polystyrène Verwendungsstelle hergestellte Produkte aus losen
expansé (PSE) en vrac et de billes en polystyrène expansé expandierten Polystyrolkugeln (EPS) und gebundenen
liées - Partie 1: Spécification pour les produits liés et en Polystyrolkugeln - Teil 1: Spezifikation für gebundene und
vrac avant mise en œuvre lose Schütt- und Einblasdämmstoffe vor dem Einbau
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 88.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16809-1:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16809-1:2015
prEN 16809-1:2014 (E)
Contents Page
Foreword .4
1 Scope .5
2 Normative references .5
3 Terms, definitions, symbols and abbreviations .6
3.1 Terms and definitions .
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27