FprEN 16876

Food processing machinery - Soft ice cream machines - Safety and hygiene requirements

FprEN 16876

Name:FprEN 16876   Standard name:Food processing machinery - Soft ice cream machines - Safety and hygiene requirements
Standard number:FprEN 16876   language:English language
Release Date:12-Apr-2017   technical committee:CEN/TC 153 - Food processing machinery - Safety and hygiene specifications
Drafting committee:CEN/TC 153/WG 6 - Artisan ice cream machinery   ICS number:67.100.40 - Ice cream and ice confectionery

SLOVENSKI STANDARD
oSIST prEN 16876:2015
01-september-2015
Stroji za predelavo hrane - Stroji za izdelavo sladoleda - Varnostne in higienske
zahteve
Food processing machinery - Soft ice cream machines - Safety and hygiene
requirements
Nahrungsmittelmaschinen - Maschinen zur Herstellung von Softeis - Sicherheits- und
Hygieneanforderungen
Machines pour les produits alimentaires - Machines pour glace à l'italienne -
Prescriptions relatives à la sécurité et l'hygiène
Ta slovenski standard je istoveten z: prEN 16876
ICS:
67.100.40 6ODGROHGLQOHGHQHVODãþLFH Ice cream and ice
confectionery
67.260 Tovarne in oprema za Plants and equipment for the
živilsko industrijo food industry
oSIST prEN 16876:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 16876:2015
oSIST prEN 16876:2015
EUROPEAN STANDARD
DRAFT
prEN 16876
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2015
ICS 67.100.40; 67.260
English Version
Food processing machinery - Soft ice cream machines - Safety
and hygiene requirements
Machines pour les produits alimentaires - Machines pour Nahrungsmittelmaschinen - Maschinen zur Herstellung von
glace à l'italienne - Prescriptions relatives à la sécurité et Softeis - Sicherheits- und Hygieneanforderungen
l'hygiène
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 153.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16876:2015 E
worldwide for CEN national Members.

oSIST prEN 16876:2015
prEN 16876:2015 (E)
Contents Page
Foreword .4
Introduction .5
1 Scope .6
2 Normative references .6
3 Terms and definitions and description of machines .7
3.1 Terms and definitions .7
3.2 Description of machines .8
4 List of significant hazards . 10
4.1 General . 10
4.2 Mechanical hazards . 10
4.3 Electrical hazards . 12
4.4 Thermal hazards . 12
4.5 Hazards generated by noise . 12
4.6 Hazard generated by neglecting ergonomic principles . 12
4.7 Hazard generated by neglecting hygienic design principles . 13
4.8 Hazards generated by loss of stability or tipping . 13
5 Safety and hygiene requirements and/or protective measures . 13
5.1 General . 13
5.2 Mechanical hazards . 13
5.2.1 Elimination of hazards by design . 13
5.2.2 Zone 1 – Access to trapping points between the reserve tank mixture and the reserve tank
mixture lid . 13
5.2.3 Zone 2 – Access to the rotating devices through the cylinder opening . 13
5.2.4 Zone 3 – Access to the transmission mechanism of the mixing device . 14
5.2.5 Zone 4 – Loss of stability of machine – access to areas adjacent to the machine . 14
5.3 Electrical hazards . 14
5.3.1 General . 14
5.3.2 Safety requirements relating to electromagnetic phenomena . 14
5.3.3 Protection against electric shock . 14
5.3.4 Power circuits . 14
5.3.5 Earth faults . 15
5.3.6 Emergency stop . 15
5.3.7 Start function . 15
5.3.8 Unexpected start-up . 15
5.3.9 Motor enclosures . 15
5.3.10 Electrical requirements of controls . 15
5.4 Thermal hazards . 15
5.5 Noise control . 15
5.6 Ergonomic design principles . 15
5.7 Hygiene requirements . 16
5.7.1 General . 16
5.7.2 Food area . 16
5.7.3 Splash area . 16
5.7.4 Non-food area . 16
5.7.5 Refrigeration . 16
5.8 Harmful substance. 17
6 Verification of safety and hygiene requirements and/or protective measures . 17
oSIST prEN 16876:2015
prEN 16876:2015 (E)
7 Information for use . 18
7.1 General . 18
7.2 Instruction handbook . 18
7.3 Service manual . 19
7.4 Cleaning . 19
7.5 Marking . 19
Annex A (normative) Noise test code (Grade 2 of accuracy) . 21
A.1 Terms and definitions . 21
A.2 Installation and mounting conditions . 21
A.3 Operating conditions . 21
A.4 Emission sound pressure level determination . 21
A.5 Measurement uncertainties . 21
A.6 Information to be recorded . 22
A.7 Information to be reported . 22
A.8 Declaration and verification of noise emission values . 22
Annex B (normative) Principles of design to ensure the cleanability of the machinery . 23
B.1 Terms and definitions . 23
B.2 Material of construction . 23
B.3 Design . 24
Annex C (normative) Testing Disinfection of Soft Ice Cream Machines . 41
C.1 Testing disinfection by cleaning . 41
C.2 Testing of the pasteurization process . 41
C.3 Testing during soft ice cream production . 42
Annex ZA (informative) Relationship between this European Standard and the Essential Requirements

of EU Directive 2006/42/EC . 43
Bibliography . 44

oSIST prEN 16876:2015
prEN 16876:2015 (E)
Foreword
This document (prEN 16876:2015) has been prepared by Technical Committee CEN/TC 153 “Machinery intended
for use with foodstuffs and feed”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the European
Free Trade Association, and supports essential requirements of EU Directive 2006/42/EC.
For relationship with EU Directive 2006/42/EC, see informative Annex ZA, which is an integral part of this document.
oSIST prEN 16876:2015
prEN 16876:2015 (E)
Introduction
This European Standard is a type C sta
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27