EN IEC 62769-6:2021

Field Device Integration (FDI) - Part 6: Technology Mapping

EN IEC 62769-6:2021

Name:EN IEC 62769-6:2021   Standard name:Field Device Integration (FDI) - Part 6: Technology Mapping
Standard number:EN IEC 62769-6:2021   language:English language
Release Date:18-Mar-2021   technical committee:CLC/TC 65X - Industrial-process measurement, control and automation
Drafting committee:IEC/SC 65E - IEC_SC_65E   ICS number:25.040.40 - Industrial process measurement and control

SLOVENSKI STANDARD
01-julij-2021
Nadomešča:
SIST EN 62769-6:2015
Integracija procesne naprave (FDI) - 6. del: Preslikava tehnologije FDI (IEC 62769-
6:2021)
Field Device Integration (FDI) - Part 6: Technology Mapping (IEC 62769-6:2021
Feldgeräteintegration (FDI) - Teil 6: FDI-Technologieabbildungen (IEC 62769-6:2021)
Intégration des appareils de terrain (FDI) - Partie 6: Mapping de technologies (IEC 62769
-6:2021)
Ta slovenski standard je istoveten z: EN IEC 62769-6:2021
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62769-6

NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2021
ICS 25.040.40; 35.100.05 Supersedes EN 62769-6:2015 and all of its amendments
and corrigenda (if any)
English Version
Field Device Integration (FDI) - Part 6: Technology Mapping
(IEC 62769-6:2021)
Intégration des appareils de terrain (FDI) - Partie 6: Feldgeräteintegration (FDI) - Teil 6: FDI-
Mapping de technologies Technologieabbildungen
(IEC 62769-6:2021) (IEC 62769-6:2021)
This European Standard was approved by CENELEC on 2021-03-12. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62769-6:2021 E

European foreword
The text of document 65E/763(F)/FDIS, future edition 2 of IEC 62769-6, prepared by SC 65E “Devices
and integration in enterprise systems” of IEC/TC 65 “Industrial-process measurement, control and
automation” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-12-12
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-03-12
document have to be withdrawn
This document supersedes EN 62769-6:2015 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62769-6:2021 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61804 series Function blocks (FB) for process control EN IEC 61804 series
and electronic device description language
(EDDL)
IEC 62541 series OPC Unified Architecture EN IEC 62541 series
IEC 62769-1 - Field Device Integration (FDI) - Part 1:EN IEC 62769-1 -
Overview
IEC 62769-2 - Field Device Integration (FDI) - Part 2: FDI EN IEC 62769-2 -
Client
IEC 62769-4 - Field Device Integration (FDI) - Part 4: FDI EN IEC 62769-4 -
Packages
ISO/IEC 19505-1 - Information technology - Object - -
Management Group Unified Modeling
Language (OMG UML) – Part 1:
Infrastructure
ISO/IEC 29500 series Information technology - Document - -
description and processing languages -
Office Open XML File Formats
IEC 62769-6
Edition 2.0 2021-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Field device integration (FDI) –

Part 6: Technology Mapping
Intégration des appareils de terrain (FDI) –

Partie 6: Mapping de technologies

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.05 ISBN 978-2-8322-9312-6

– 2 – IEC 62769-6:2021 © IEC 2021
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, abbreviated terms, symbols and conventions . 7
3.1 Terms and definitions . 7
3.2 Abbreviated terms . 8
3.3 Symbols . 8
3.4 Conventions . 8
4 Technical concepts . 8
4.1 General . 8
4.1.1 Overview . 8
4.1.2 Platforms . 9
4.1.3 FDI Type Library . 9
4.2 UIP representation . 10
4.3 UIP executable representation . 11
4.4 UIP executable compatibility rules . 11
4.5 Allowed .NET Common Language Run-time versions . 11
4.5.1 General . 11
4.5.2 CLR compatibility strategy . 11
4.5.3 How to identify the .NET target platform of a UIP . 12
4.6 UIP Deployment . 12
4.7 UIP Lifecycle. 13
4.7.1 General . 13
4.7.2 UIP Assembly activation steps . 13
4.7.3 UIP Assembly deactivation steps . 15
4.8 Interaction between an FDI Client and a UIP . 16
4.8.1 Handling of standard UI elements . 16
4.8.2 Non-blocking service execution . 16
4.8.3 Blocking service execution. 17
4.8.4 Cancel service execution . 18
4.8.5 Threading . 19
4.8.6 Timeout . 19
4.8.7 Exception handling . 20
4.8.8 Type safe interfaces . 21
4.8.9 Globalization and localization . 21
4.8.10 WPF Control handling . 21
4.8.11 Win Form handling . 21
4.9 Security . 21
4.9.1 General . 21
4.9.2 Access permissions . 22
4.9.3 Code identity concept . 22
5 Interface definition . 23

Figure 1 – FDI Type Library structure . 10

IEC 62769-6:2021 © IEC 2021 – 3 –
Figure 2 – .NET surrogate process . 12
Figure 3 – Identification of Run-time Version. 12
Figure 4 – IAsyncPattern based asynchronous service execution example . 17
Figure 5 – Blocking service execution example using IAsyncResult based pattern . 18
Figure 6 – Cancel service processing sequence example . 18
Figure 7 – Exception source . 20

Table 1 – Technology edition reference . 9
Table 2 – Base Property Services . 23
Table 3 – Device Model Services . 23
Table 4 – Access Control Services . 24
Table 5 – Direct Access Services . 24
Table 6 – Hosting Services . 24
Table 7 – UIP Services . 26
Table 8 – Base Data Types . 26
Table 9 – Special Types . 27

– 4 – IEC 62769-6:2021 © IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIELD DEVICE INTEGRATION (FDI) –

Part 6: Technology Mapping
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27