|
SLOVENSKI STANDARD
01-september-2021
Avtomatski stroji za nego tal za komercialno uporabo - Posebne zahteve
Automatic floor treatment machines for commercial use - Particular requirements
Ta slovenski standard je istoveten z: EN IEC 63327:2021
ICS:
97.080 Aparati za čiščenje Cleaning appliances
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 63327
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2021
ICS 13.120; 97.080
English Version
Automatic floor treatment machines for commercial use -
Particular requirements
(IEC 63327:2021)
Machines automatiques de traitement des sols à usage Automatische Bodenbehandlungsmaschinen für den
commercial - Exigences particulières gewerblichen Gebrauch - Besondere Anforderungen
(IEC 63327:2021) (IEC 63327:2021)
This European Standard was approved by CENELEC on 2021-06-08. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63327:2021 E
European foreword
The text of document 61J/734/CDV, future edition 1 of IEC 63327, prepared by SC 61J "Electrical
motor-operated cleaning appliances for commercial use" of IEC/TC 61 "Safety of household and
similar electrical appliances" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 63327:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-03-08
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-06-08
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 63327:2021 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60068-2-78:2012 NOTE Harmonized as EN 60068-2-78:2013 (not modified)
IEC 60204-1:2016 NOTE Harmonized as EN 60204-1:2018 (modified)
IEC 60335 (series) NOTE Harmonized as EN 60335 (series)
IEC 60335-2-2 NOTE Harmonized as EN 60335-2-2
IEC 60335-2-10:2002 NOTE Harmonized as EN 60335-2-10:2003 (not modified)
IEC 60335-2-29:2016 NOTE Harmonized as EN 60335-2-29:— (not modified)
IEC 60335-2-100 NOTE Harmonized as EN 50636-2-100
IEC 60601-1 NOTE Harmonized as EN 60601-1
IEC 61508 (series) NOTE Harmonized as EN 61508 (series)
IEC 62885-9:2019 NOTE Harmonized as EN IEC 62885-9:2019 (not modified)
ISO 3691-4 NOTE Harmonized as EN ISO 3691-4
ISO 3743-1:2010 NOTE Harmonized as EN ISO 3743-1:2010 (not modified)
ISO 3744:2010 NOTE Harmonized as EN ISO 3744:2010 (not modified)
To be published. Stage at the time of publication: FprEN 60335-2-29:2020.
ISO 4871:1996 NOTE Harmonized as EN ISO 4871:2009 (not modified)
ISO 9614-2:1996 NOTE Harmonized as EN ISO 9614-2:1996 (not modified)
ISO 11203:1995 NOTE Harmonized as EN ISO 11203:2009 (not modified)
ISO/TR 11688-1 NOTE Harmonized as EN ISO 11688-1
ISO 13482:2014 NOTE Harmonized as EN ISO 13482:2014 (not modified)
ISO 13732-1 NOTE Harmonized as EN ISO 13732-1
ISO 13856-3:2013 NOTE Harmonized as EN ISO 13856-3:2013 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60335-1 2020 Household and similar electrical EN IEC 60335-1 —
appliances - Safety - Part 1: General
requirements
IEC 60335-2-69 2021 Household and similar electrical - -
appliances - Safety - Part 2-69: Particular
requirements for wet and dry vacuum
cleaners, including power brush, for
commercial use
IEC 60335-2-72 2021 Household and similar electrical - -
appliances - Safety - Part 2-72: Particular
requirements for floor treatment machines
with or without traction drive, for
commercial use
IEC 61032 - Protection of persons and equipment by EN 61032 -
enclosures - Probes for verification
IEC 61058-1 - Switches for appliances - Part 1: General EN IEC 61058-1 -
requirements
IEC 61770 2008 Electric appliances connected to the EN 61770 2009
water mains - Avoidance of
backsiphonage and failure of hose-sets
- - + AC 2011
- - + A11 2018
IEC 62061 - Safety of machinery - Functional safety of EN IEC 62061 -
safety-related control systems
ISO 13849-1 - Safety of machinery - Safety-related parts EN ISO 13849-1 -
of control systems - Part 1: General
principles for design
To be published. Stage at the time of publication: FprEN IEC 60335-1:2020.
Publication Year Title EN/HD Year
ISO 13857 2019 Safety of machinery - Safety distances to EN ISO 13857 2019
prevent hazard zones being reached by
upper and lower limbs
ISO 18646-1 2016 Robotics - Performance criteria and - -
related test methods for service robots -
Part 1: Locomotion for wheeled robots
IEC 63327
Edition 1.0 2021-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Automatic floor treatment machines for commercial use –
Particular requirements
Machines automatiques de traitement des sols à usage commercial –
Exigences particulières
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.120; 97.080 ISBN 978-2-8322-9763-6
– 2 – IEC 63327:2021 © IEC 2021
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 7
3 Terms and definitions . 8
4 General requirements . 11
5 General conditions for the tests . 11
6 Starting of motor operated appliances . 11
7 Stability and mechanical hazards . 12
8 Construction . 15
Annexes . 17
Annex FF (normative) Additional requirements for automatic floor treatment machines
not equipped with a manual mode . 18
Annex GG (normative) Requirements for docking stations for automatic floor treatment
machines for commercial use . 20
Annex HH (normative) Requirements to avoid backsiphonage at docking stations . 31
Annex II (informative) Emission of acoustical noise of docking stations . 32
Annex JJ (informative) Alternative route to fulfil safety critical functions . 34
Bibliography . 35
Figure 1 – Measurement of confined space speed . 16
Figure 2 – Confined space, stopping zone, and contact zone . 16
Figure 3 – Obstacle positioning during docking process . 16
Table 1 – Minimum required performance levels . 13
Table GG.1 – Degree of protection against harmful ingress of water . 21
Table JJ.1 – Safety functions . 34
IEC 63327:2021 © IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
AUTOMATIC FLOOR TREATMENT MACHINES FOR COMMERCIAL USE –
PARTICULAR REQUIREMENTS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses aris
...