|
SLOVENSKI STANDARD
01-januar-2019
Sortiranje LED - 1. del: Splošne zahteve in bela barvna mreža, namenjena za
uporabo v avtomobilski industriji - Dopolnilo A1 (IEC 62707-1:2013/A1:2018)
LED-binning - Part 1: General requirements and white colour grid intended for
automotive applications (IEC 62707-1:2013/A1:2018)
LED-Binning - Teil 1: Allgemeine Anforderungen und Weißfelder (IEC 62707-
1:2013/A1:2018)
Tri des LED - Partie 1: Exigences générales et matrice de couleur blanche destinées aux
applications automobiles (IEC 62707-1:2013/A1:2018)
Ta slovenski standard je istoveten z: EN 62707-1:2014/A1:2018
ICS:
29.140.01 Žarnice na splošno Lamps in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62707-1:2014/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2018
ICS 29.140.99
English Version
LED-binning - Part 1: General requirements and white colour
grid intended for automotive applications
(IEC 62707-1:2013/A1:2018)
Tri des LED - Partie 1: Exigences générales et matrice de LED-Binning - Teil 1: Allgemeine Anforderungen und
couleur blanche destinées aux applications automobiles Weißfelder
(IEC 62707-1:2013/A1:2018) (IEC 62707-1:2013/A1:2018)
This amendment A1 modifies the European Standard EN 62707-1:2014; it was approved by CENELEC on 2018-09-21. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62707-1:2014/A1:2018 E
European foreword
The text of document 34A/2098/FDIS, future IEC 62707-1/A1, prepared by SC 34A "Lamps" of
IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 62707-1:2014/A1:2018.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-06-21
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2021-09-21
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62707-1:2013/A1:2018 was approved by CENELEC as a
European Standard without any modification.
IEC 62707-1
Edition 1.0 2018-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
LED-binning –
Part 1: General requirements and white colour grid intended for automotive
applications
Tri des LED –
Partie 1: Exigences générales et matrice de couleur blanche destinées aux
applications automobiles
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-5944-3
– 2 – IEC 62707-1:2013/AMD1:2018
© IEC 2018
FOREWORD
This amendment has been prepared by subcommittee 34A: Lamps, of IEC technical
committee 34: Lamps and related equipment.
The text of this amendment is based on the following documents:
FDIS Report on voting
34A/2098/FDIS 34A/2107/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
Title
Replace the part title as follows:
Part 1: General requirements and white colour grid intended for
automotive applications
1 Scope
Replace, in the first paragraph, the last sentence with the following new text:
“It applies to LED packages intended for automotive applications.”
Add, at the end of Clause 4, the following new Clause 5:
5 Binning test procedure
5.1 General
For LED packages producing visible radiation the following binning test procedure shall be
applied. Annex C gives information on the recommended measurement accuracy.
IEC 62707-1:2013/AMD1:2018 – 3 –
© IEC 2018
5.2 Temperature pre-conditioning
Before starting the binning test procedure, the LED package temperatures shall be stabilized
as follows:
Each of T , T , T , T shall be 23 °C ± 5 °C
a s c j
where
T is the ambient temperature of
...