|
SLOVENSKI STANDARD
01-januar-2022
Organska svetleča dioda (OLED), svetlobni viri za splošno razsvetljavo - Varnost -
2-2. del: Posebne zahteve - Integrirani moduli OLED (IEC 62868-2-2:2020)
Organic light emitting diode (OLED) light sources for general lighting - Safety - Part 2-2:
Particular requirements - Integrated OLED modules (IEC 62868-2-2:2020)
Organische Licht emittierende Dioden (OLED) Lichtquellen für die Allgemeinbeleuchtung
- Sicherheit - Teil 2-2: Besondere Anforderungen - Integrierte OLED-Module (IEC 62868-
2-2:2020)
Sources lumineuses à diodes électroluminescentes organiques (OLED) destinées à
l’éclairage général - Sécurité - Partie 2-2: Exigences particulières - Modules OLED
intégrés (IEC 62868-2-2:2020)
Ta slovenski standard je istoveten z: EN IEC 62868-2-2:2021
ICS:
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62868-2-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2021
ICS 29.140.99
English Version
Organic light emitting diode (OLED) light sources for general
lighting - Safety - Part 2-2: Particular requirements - Integrated
OLED modules
(IEC 62868-2-2:2020)
Sources lumineuses à diodes électroluminescentes Organische Licht emittierende Dioden (OLED) Lichtquellen
organiques (OLED) destinées à l'éclairage général - für die Allgemeinbeleuchtung - Sicherheit - Teil 2-2:
Sécurité - Partie 2-2: Exigences particulières - Modules Besondere Anforderungen - Integrierte OLED-Module
OLED intégrés (IEC 62868-2-2:2020)
(IEC 62868-2-2:2020)
This European Standard was approved by CENELEC on 2020-09-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62868-2-2:2021 E
European foreword
The text of document 34A/2193/FDIS, future edition 1 of IEC 62868-2-2, prepared by SC 34A "Electric
light sources" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN IEC 62868-2-2:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-05-05
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-11-05
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62868-2-2:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62384 NOTE Harmonized as EN IEC 62384
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60598-1 (mod) 2014 Luminaires - Part 1: General requirements EN 60598-1 2015
and tests
+ A1 2017 + A1 2018
IEC 60838-2-2 - Miscellaneous lampholders - Part 2-2: EN 60838-2-2 -
Particular requirements - Connectors for
LED-modules
IEC 61347-1 2015 Lamp controlgear - Part 1: General and EN 61347-1 2015
safety requirements
+ A1 2017 + A1 2021
IEC 62504 - General lighting - Light emitting diode EN 62504 -
(LED) products and related equipment -
Terms and definitions
IEC 62868-1 2020 Organic light emitting diode (OLED) Light EN IEC 62868-1 2021
sources for general lighting - Safety - Part
1: General requirements and tests
IEC/TS 62972 - General lighting - Organic light emitting - -
diode (OLED) products and related
equipment - Terms and definitions
IEC 62868-2-2
Edition 1.0 2020-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Organic light emitting diode (OLED) light sources for general lighting – Safety –
Part 2-2: Particular requirements – Integrated OLED modules
Sources lumineuses à diodes électroluminescentes organiques (OLED)
destinées à l’éclairage général – Sécurité –
Partie 2-2: Exigences particulières – Modules OLED intégrés
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-8760-6
– 2 – IEC 62868-2-2:2020 © IEC 2020
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General . 6
4.1 General requirements . 6
4.2 General test requirements . 6
4.3 Other requirements . 6
5 Marking . 6
5.1 Contents and location . 6
5.2 Durability and legibility of marking . 6
6 Construction . 6
7 Mechanical hazard . 6
8 Fault conditions . 7
9 Insulation resistance and electric strength after humidity treatment . 7
9.1 General requirements . 7
9.2 Insulation resistance . 7
9.3 Electric strength . 7
10 Thermal stress . 7
11 Creepage distances and clearances . 8
12 Resistance to heat and fire . 8
13 Photobiological safety . 8
14 Terminals . 8
15 Information for luminaire design . 8
16 Protection against accidental contact with live parts . 8
17 Screws, current-carrying parts and connections . 8
18 Resistance to corrosion . 8
19 Provisions for protective earthing. 8
Annex A (informative) Examples of integrated OLED modules . 9
Bibliography . 11
Figure A.1 – Independent OLED module for luminaire . 9
Figure A.2 – Built-in OLED module for lighting . 10
IEC 62868-2-2:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ORGANIC LIGHT EMITTING DIODE (OLED) LIGHT
SOURCES FOR GENERAL LIGHTING – SAFETY –
Part 2-2: Particular requirements – Integrated OLED modules
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
...