Sometimes it works, but most of the time it doesn't. When the AC power generated by the wind turbine is used to directly drive the AC load, the load should not require a stable frequency, such as an electric heater. Note: In principle, the load current, voltage and power values should not exceed the relevant nominal parameters of the wind turbine. Single-phase alternators carry single-phase AC loads and three-phase alternators carry three-phase loads. For most standard AC equipment, such as household appliances (lights, televisions, refrigerators) and AC equipment requiring AC power to operate, standard AC power must be provided. Wind power generation systems must use certain conversion methods to convert non-standard alternating current to standard alternating current before they can be used.e used in these devices.
The wind turbine generates AC power, can it be used directly to transport AC loads?
Introduction The wind turbine generates AC power, can it be used directly to transport AC loads? Sometimes it works, but most of the time it doesn't. When the alternating current generated by the wind turbine directly drives the AC load