The production method is as follows:
1. Buy a generator with a power of 200w and a rated speed of around 400rpm;
2. some ABS pipes to cut it. The blades are then cut and polished properly as shown below:
3. Find a metal disc to connect the generator and the blades, which is the hub of the generator;< /p>
4. Drill holes on the blades and the metal discs. Pay attention to the best time to drill holes when drilling, for example:
5. You can find a hub cover for the wheel. hub to prevent the screws from being exposed to wind and sun. It can play the role of diversion
6. Make a stand to place the generator on, just some wood, then use some wire or iron sheets to place it on. fix the generator;
7. Make a connecting rod, preferably with a bearing; then make a tower with water pipes, and themwires connecting the generator can simply pass through this hole to finally connect the tower; generator and secure it with guyed steel cables to complete production.
Use a puller to remove the rear axle cover.
Electric machines (English: electric machines, commonly called "motor") refer to an electromagnetic device that converts or transmits electrical energy based on the law of electromagnetic induction. It is represented by the letter M (D in the old standard) in the circuit. Its main function is to generate motor torque and serve as a source of energy for electrical appliances or various machines. The generator is represented by the letter G in the circuit. Its main function is to convert electrical energy into mechanical energy.